Support in other languages: 
Showing results for 
Search instead for 
Do you mean 
Reply
Fanfold Paper
TheFallen
Posts: 14
Registered: ‎10-28-2009
Location: USA
0

IBM ThinkCentre S50 8183-32U (Memory Compatibility) Help!

[ Edited ]

I'm looking to upgrade my IBM ThinkCentre S50 8183-32U;

Here is what I know:

 

333Mhz DDR SDRAM (PC2700)
184 pin DIMM sockets (2GB Max)
Non-ECC/Parity
Unbuffered

 

What I don't know is if the RAM that is compatible with this machine is High Density, Low Density, or both...  Could someone please explain and fill me in?  :smileysad:

 

Please reference the following:

http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-51182

Fanfold Paper
TheFallen
Posts: 14
Registered: ‎10-28-2009
Location: USA
0

Re: IBM ThinkCentre S50 8183-32U (Memory Compatibility) Help!

Oh come on!  No one knows for sure?  :smileysad:  So far I have verified that low density memory will work, however I haven't verified high density yet.  I've asked multiple webstores about the compatibility but the response is always either verifiying what I already know, or linking me to "IBM tested and compatible Memory" that they sell for 80% more money than normal memory.  Ugh!  What is this crap!?

What's DOS?
rockygryphon
Posts: 1
Registered: ‎02-23-2012
Location: USA
0

Re: IBM ThinkCentre S50 8183-32U (Memory Compatibility) Help!

Did you ever figure this out?  I have the same question.  Where did you find out that low density is compatible?

 

In the following link, it appears that low and high density are used to refer to the amount of RAM on each chip.

 

http://www.crucial.com/kb/answer.aspx?qid=3647

 

On wikipedia, density seems to relate to chip configuration and high density is only compatible with 10% of motherboards.

 

https://en.wikipedia.org/wiki/DDR_SDRAM

 

I guess the answer is here where it says that IBM only uses low density:

 

http://reviews.ebay.com/Myth-Low-Density-vs-High-Density-memory-modules_W0QQugidZ10000000001236178

 

quote:

"In summary:-

  • LOW DENSITY modules have 100% compatibility with ALL systems and ALL chipsets as it fully follows JEDECguidelines.
  • HIGH DENSITY modules only have 10% compatibility and are VERY SLOW as it breaks all JEDEC guidelines.

This is also why almost all Branded-Name systems such as Apple/MAC, Compaq/HPDell and IBM only uses LOW DENSITY modules."

 

In this case it seems it's not worth gambling on the cheap price that high density always seems to have.