Support in other languages: 
Reply
Serial Port
engine
Posts: 29
Registered: ‎12-01-2011
Location: United States
0
Accepted Solution

[K1]- Could not open the SD card door with the clip pin

[ Edited ]

Got my 32Gb K1 two days ago.

 

Really had a hard time on opening the SD card door. Now understand what was in the reviews, 'Lenovo made it unnecessary difficult to open the SD card door'.

 

Watched the Youtube video several times, then I tried to poke the clip pin into the hole, tried different angles, the door just opened a little bit (like 0.5mm), could not open more.  

 

Any tricks, what angle, how deep should the pin stick in? Do I need to push really hard?

 

If I can not open the door, I have to return it. I can tolerate software bugs, wait for updates. But without sd card function, there is no point to keep the unit. So frustrated now.

 

Thanks for your help. 

 

 

Posts: 1,502
Topics: 38
Kudos: 117
Solutions: 49
Registered: ‎04-20-2010
Location: Jeffersonville, Indiana
0

Re: [K1]- Could not open the SD card door with the clip pin

I just pushed the little pin looking thing that it came with straight in. I think I did have to push slightly hard to pop it open.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, ThinkPad L410, and IdeaPad U410 Touch

Deutsche Deutsche Community   Español Comunidad en Español

Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!
Serial Port
engine
Posts: 29
Registered: ‎12-01-2011
Location: United States
0

Re: [K1]- Could not open the SD card door with the clip pin

[ Edited ]

Thanks for replying.

 

I pushed many times, no sucess. Then I asked two others to try, both gave up.

 

We watched the Youtube video, it seems to push in an angle toward the sd card. No much force is needed.

 

Anyway, I may send the unit for depot service.

 

-------------

 

Punch Card
remn
Posts: 58
Registered: ‎11-09-2011
Location: Canada
0

Re: [K1]- Could not open the SD card door with the clip pin

[ Edited ]

It is not a tray that pops out, it is more like a flap door. When you push the pin in, it releases a catch on the pin side allowing the cover to swing open. Pin side opens, opposite side has hinge.

 

Just looked at the mechanism, it only takes about 1 mm push. It is a simple lever, you push on one side (pin hole) and the other side pushes up under the side of the flap door, pushing it open as it is just friction fit.

 

Rem

I used to have a:
K1_A301_14_14_120109_US
Serial Port
engine
Posts: 29
Registered: ‎12-01-2011
Location: United States
0

Re: [K1]- Could not open the SD card door with the clip pin

Thanks. I will give a one more try. Once the door is open, I will leave it open for its rest of life. 

Why does Lenovo make life so complicated? It seems that every review mention this stupid door.

Posts: 1,502
Topics: 38
Kudos: 117
Solutions: 49
Registered: ‎04-20-2010
Location: Jeffersonville, Indiana
0

Re: [K1]- Could not open the SD card door with the clip pin

Well the great thing about it is making it hard for a thief to take off with your 32g SD Card. :smileywink:
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, ThinkPad L410, and IdeaPad U410 Touch

Deutsche Deutsche Community   Español Comunidad en Español

Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!
Serial Port
engine
Posts: 29
Registered: ‎12-01-2011
Location: United States
0

Re: [K1]- Could not open the SD card door with the clip pin

[ Edited ]

It is much easier for the thief to just take the whole tablet. SD card is in almost every laptop, no other 

laptop/tablet maker uses a door to guard it.

 

 

Serial Port
engine
Posts: 29
Registered: ‎12-01-2011
Location: United States
0

Re: [K1]- Could not open the SD card door with the clip pin

Gave a last try, poke straight into the hole, the door open slightly, but stuck. No enough area to pry the door open. 

I believe the door fit too tightly with the frame, and get stuck. Going to have Lenovo replace the door or return to store.

802.11n
allanlau
Posts: 148
Registered: ‎11-18-2011
Location: Malaysia
0

Re: [K1]- Could not open the SD card door with the clip pin

If you try to open it the first time, yes, it is very tight. Once you got it the first time, it will be easier next time. AND the card can only be taken out by pressing IN for the spring to eject out. DO NOT pull the card. However, even if you let it sprung out, it is still a bit too deep to take out by fingers.

Serial Port
engine
Posts: 29
Registered: ‎12-01-2011
Location: United States
0

Re: [K1]- Could not open the SD card door with the clip pin

After reviewing the disassemble K1 video, I pried from the screen side to pop the door open. 

The door seems poortly manufactured, use a sand paper to remove some material on door should help.