Support in other languages: 
Reply
What's DOS?
Maverick895
Posts: 2
Registered: ‎12-30-2011
Location: Canada

Re: how i flashed from Canadian version to US and upgraded to Android 3.2.1

Thanks for this bit of info.  I did it and now it works like a charm.  It seems that the last update for Canada actually changes the firmware to the US version and that is why when you go to the download site there is no longer any Canadian versions after 3.1.

 

Only thing is I think there are still a lot of k1 out there that will never get this update because the OTA for Canada does not work.

Paper Tape
dssl
Posts: 2
Registered: ‎01-05-2012
Location: Canada
0

Re: how i flashed from Canadian version to US and upgraded to Android 3.2.1

Hi, I try everything you said in the procedure but it doesn't work for me! Do you any idea what else I can do?

Punch Card
remn
Posts: 58
Registered: ‎11-09-2011
Location: Canada

Re: how i flashed from Canadian version to US and upgraded to Android 3.2.1

What is your current build number as seen in settings/about tablet?

 

Are you sure you are completely powered off and doing a cold boot?

 

If it does not work, you should still have update.zip and update.xml in your download folder on the K1 as these two files will disappear after the update process.

 

Rem

I used to have a:
K1_A301_14_14_120109_US
Paper Tape
dssl
Posts: 2
Registered: ‎01-05-2012
Location: Canada
0

Re: how i flashed from Canadian version to US and upgraded to Android 3.2.1

hi remn, finally this morning after a goodnight, I retry until the K1 was full of charge and it worked great thanks for your procedure and the time you take to respond to me.

Dssl
Punch Card
remn
Posts: 58
Registered: ‎11-09-2011
Location: Canada
0

Re: how i flashed from Canadian version to US and upgraded to Android 3.2.1

You are welcome but it was monilall11 who originally found this and posted, I just suggested a slightly modified procedure.

 

Remn

I used to have a:
K1_A301_14_14_120109_US
Punch Card
monilall11
Posts: 35
Registered: ‎11-06-2011
Location: montreal, canada
0

Re: how i flashed from Canadian version to US and upgraded to Android 3.2.1

It is too bad that LENOVO does not fix the OTA for canada because lots of Canadian K1's are stuck using 3.1 and not getting any new fixes.
Blue Screen Again
whisper1982
Posts: 2
Registered: ‎01-12-2012
Location: Canada
0

Re: how i flashed from Canadian version to US and upgraded to Android 3.2.1

Hi everyone!!

 

ok please try to help me. First i would like to sorry for my english beacause i usually talk in french!

 

1 )I have downloaded the to files and put into dowload folder

2) rename the files to update.zip and update.xml

3) power Off

4) Power ON holding the volume +/-

5) I can see booting Kernel Image and after an Android with an Exclamation and a yellow triangle

 

and do nothing....

 

I have this Model

 

Model: K1

Android Version : 3.1

Kernel : 2.6.36.3

Build : K1_A301_02_02_110930_CA

 

Thanks for your help

Punch Card
remn
Posts: 58
Registered: ‎11-09-2011
Location: Canada
0

Re: how i flashed from Canadian version to US and upgraded to Android 3.2.1

It sounds like it does not like something in the two files you placed there. I would try deleting the files on the K1, then download the two K1_A301_10_10_CAfiles from Lenovo site to PC again, rename, then transfer to K1 and try again.

 

Rem

 

 

I used to have a:
K1_A301_14_14_120109_US
Blue Screen Again
whisper1982
Posts: 2
Registered: ‎01-12-2012
Location: Canada
0

Re: how i flashed from Canadian version to US and upgraded to Android 3.2.1

Hi Remn!

 

Thank for the info! i did what you tell me to do and everything working fine now!!

 

Thanks for your help!!

Paper Tape
caballo21
Posts: 2
Registered: ‎01-20-2012
Location: burnaby BC CANADA
0

Re: how i flashed from Canadian version to US and upgraded to Android 3.2.1

hi whisper 1982 . i have the same problem like you have before .

1 )I have downloaded the to files and put into dowload folder

2) rename the files to update.zip and update.xml

3) power Off

4) Power ON holding the volume +/-

5) I can see booting Kernel Image and after an Android with an Exclamation and a yellow triangle

 

and do nothing....

 

I have this Model

 

Model: K1

Android Version : 3.1

Kernel : 2.6.36.3

Build : K1_A301_02_02_110930_CA  i have the same model k1 like you .how did you download the xml file maybe  that i did  wrong. thank for help me