01-31-2011 01:07 AM
Hi,
I have an S10 that is not dowloading windows updates and is also flickering between programs. On start up it beeps continuously. I am not sure that they are related issues. Any advice?
Should I update the BIOS? How do I do that?
Thanks
01-31-2011 02:50 AM - edited 01-31-2011 02:52 AM
Hi and welcome,
could caused by a memory failure...
remove and try with a different mem stick..
before you try to BIOS update i prefer to recover your machine...to exclude windows failure or virus/malware or something else...
Beep Code Table
Symptom or error FRU or action, in sequence
One beep and a blank, unreadable, or flashing LCD.
1. Reseat the LCD connector.
2. LCD assembly.
3. External CRT.
4. System board.
One long and two short beeps, and a blank or unreadable LCD.
1. System board.
2. LCD assembly.
3. DIMM.
Two short beeps with error codes.
Two short beeps and a blank screen.
1. System board.
2. DIMM.
Three short beeps, pause, three more short beeps, and one short beep.
1. DIMM.
2. System board
One short beep, pause, three short beeps, pause, three more short beeps, and one short
beep. Only the cursor appears. Reinstall the operating system.
Four cycles of four short beeps and a blank screen.
System board
Five short beeps and a blank screen.
System board
sincerely KalvinKlein
01-31-2011 03:45 AM
It is a continuous repeating beep on startup.
01-31-2011 08:11 AM
try this
02-01-2011 03:17 AM
02-01-2011 04:04 AM
02-01-2011 04:08 AM
02-01-2011 04:15 AM
02-01-2011 04:28 AM
02-01-2011 04:50 AM