Support in other languages: 
Showing results for 
Search instead for 
Do you mean 
Reply
Punch Card
Ilham
Posts: 5
Registered: ‎11-09-2009
Location: Germany
0

Re: Fan Control for the S10(e) - user-developed solution

with the NHC you can not control directly the fan...

i need onlye the program" S10Fan" for my S10-2

 

 

Punch Card
watchthisspace
Posts: 10
Registered: ‎03-25-2009
Location: New Zealand
0

Re: Fan Control for the S10(e) - user-developed solution

Is there a way to shut the fan up when one is using windows 7?

Fanfold Paper
xiongguoy
Posts: 4
Registered: ‎11-04-2008
Location: Malaysia
0

Re: User-developed Fan Control for the S10(e)

I've tried using S10fanctrl,

to see if it works, I set it to manual - off.

since then my fan does not work anymore, not even during bios post.

now it idles at 80c, and constantly shuts off due to over heat.

 

Lenovo S10

Model 20015

Bios version 14CN94WW

 

please advise

 

Serial Port
Carsten
Posts: 54
Registered: ‎04-11-2009
Location: Germany
0

Re: User-developed Fan Control for the S10(e)

That sounds similar to the battery detection problem. I would recommend to check if the problem can be solved with the same actions:

 

- remove AC-adapter and battery

- wait 30 seconds

- replace battery and AC-adapter

- test

- if it does not work, redo it with holding down the power button for 30 seconds.

 

Greetings

 

Carsten

Fanfold Paper
xiongguoy
Posts: 4
Registered: ‎11-04-2008
Location: Malaysia
0

Re: User-developed Fan Control for the S10(e)

Thank you for your prompt reply. I was ready to go to the service center.

It took a few tries, but eventually the fan came back.

Tried playing with S10fanctrl again and everything works as advertised.

 

I use MobileMeter to monitor speedstep freq, temp and batt watt drain.

When S10fanctrl set to manual - off, MobileMeter always reports 35c.

When S10fanctrl set to manual - Lvl3, MobileMeter always reports 80c.

Just FYI.

What's DOS?
spam
Posts: 1
Registered: ‎11-21-2010
Location: ro
0

Re: User-developed Fan Control for the S10(e)

great. working great for windows but WHAT ABOUT LINUX ???
it's driving me mad..
What's DOS?
doctavic
Posts: 3
Registered: ‎02-19-2011
Location: NEW YORK
0

Re: User-developed Fan Control for the S10(e)

i had the same problem of running s10 fan control with windows 7, but it does work.   just need to run it in compatibility mode!!

Paper Tape
erhtun
Posts: 1
Registered: ‎04-18-2011
Location: Türkiye
0

Re: User-developed Fan Control for the S10(e)

[ Edited ]

Does this program works on S10-3c?

I measured core temperature with CoreTemp. When I boot netbook fan doesn't work. After loading windows 7 fan is working. Until 55 degre fan speed is normal but after 55 degrees fan speed is increasing and working loudly. I upgrade the BIOS version from 3CCN09WW to 3CCN13WW. But this is doesn't work. What can I do for solve this problem?

 

KalvinKlein
Posts: 2,334
Registered: ‎01-21-2009
Location: Germany Hannover
0

Re: User-developed Fan Control for the S10(e)

Hi and welcome,

No that program works only on older model. S10(e) . Newer model like S10-3 (& s / c / t) will not work different chipset and fan control register...

 

sincerely KalvinKlein

______________________________________
Thinkpad 2x X200s L9600/9400 AFFS 8GB 3G SSD Win7 64bit
Thinkpad X301 8GB 3G SSD Win7 64Bit Ft. Speakerbezel Metal Mod