Support in other languages: 
Reply
Punch Card
regusi
Posts: 22
Registered: ‎08-09-2011
Location: nepal
0

Broadcom PXE v2.1 v9.7.8 E61 ERROR

[ Edited ]

hi
I have a similar problem. My laptop is lenovo z570 i3 3gb ram 640 gb hdd. I have done chkdsk from dos prompt, completely formatted the HDD and installed a fresh copy of win 7 HB. I still get the problem. any ideas on how to solve it?!

 

subject & text edited 

Community Moderator
yigit
Posts: 12,939
Registered: ‎12-07-2009
Location: Marmaris
0

Re: Broadcom PXE v2.1 v9.7.8 E61 ERROR

hi regusi.

have you tried to flash bios update first?

http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_list.aspx?CategoryID=307140

if it doesn't help, you may have hardware issue possible connector or cable so better to call lenovo support line.


due to my absence, i may not reply your posts and/or personal messages

http://www.krasotaiskusstva.com
Punch Card
regusi
Posts: 22
Registered: ‎08-09-2011
Location: nepal
0

Re: Broadcom PXE v2.1 v9.7.8 E61 ERROR

hi yigit. yes i have the current bios version that i updated from the lenovo site! i bought this system frm india and i am in Kathmandu right now where they dont cover my warranty! :smileysad:.
is there like a physical wire that is present that could b loose or it is a connecter that is fused to motherboard! any idea?
just as a side note, from the time i have noticed this issue, my hdd light is almost constantly on and my system performance has gone down a bit!! my average disk queue length is 5, pretty high right!!!
Community Moderator
yigit
Posts: 12,939
Registered: ‎12-07-2009
Location: Marmaris
0

Re: Broadcom PXE v2.1 v9.7.8 E61 ERROR

[ Edited ]

please, check hdd cable if you can.
( if you have to dissemble your computer, due to it voids your warranty, not suggested )

 

can you also check bios order? make sure the lan network is listed #3rd boot device.



due to my absence, i may not reply your posts and/or personal messages

http://www.krasotaiskusstva.com
Punch Card
regusi
Posts: 22
Registered: ‎08-09-2011
Location: nepal
0

Re: Broadcom PXE v2.1 v9.7.8 E61 ERROR

the network boot is the last option on my BIOS.
I opened the cover and removed the hard drive, cudnt c any wires at all. my only guess is that the other end connected to the motherboard mayb. Running out of options and idea :smileysad:
Community Moderator
yigit
Posts: 12,939
Registered: ‎12-07-2009
Location: Marmaris
0

Re: Broadcom PXE v2.1 v9.7.8 E61 ERROR

do you have valid warranty?


due to my absence, i may not reply your posts and/or personal messages

http://www.krasotaiskusstva.com
Punch Card
regusi
Posts: 22
Registered: ‎08-09-2011
Location: nepal
0

Re: Broadcom PXE v2.1 v9.7.8 E61 ERROR

i do. but it is valid only in india where i bought it. not in nepal where i m rite now.
Community Moderator
yigit
Posts: 12,939
Registered: ‎12-07-2009
Location: Marmaris
0

Re: Broadcom PXE v2.1 v9.7.8 E61 ERROR

[ Edited ]

pxe error messages usually point hardware issue ( mainboard ). that's why i was gonna suggest you to contact lenovo support line.

sorry to say that but, i don't think i'll be able to help you anymore. hope someone else can.



due to my absence, i may not reply your posts and/or personal messages

http://www.krasotaiskusstva.com
Punch Card
regusi
Posts: 22
Registered: ‎08-09-2011
Location: nepal
0

Re: Broadcom PXE v2.1 v9.7.8 E61 ERROR

motherboard!!! we i guess i m gonna take it to a repair shop then and see wat they say. thanks Yigit!
Community Moderator
yigit
Posts: 12,939
Registered: ‎12-07-2009
Location: Marmaris
0

Re: Broadcom PXE v2.1 v9.7.8 E61 ERROR

you're welcome. please, post back the results.


due to my absence, i may not reply your posts and/or personal messages

http://www.krasotaiskusstva.com