Support in other languages: 
Reply
Token Ring
middleton
Posts: 160
Registered: ‎10-30-2009
Location: Russia
0

Re: Y550 Virtualization Problem!!

[ Edited ]

Guys!

I already have Y550 firmware so don't send it on my email anymore. I will try to analyze BIOS and turn VT on. But don't wait too much from me - Phoenix UEFI BIOS is a little complicated, so probability of success is not so great. Thanks.

Paper Tape
mudy1
Posts: 2
Registered: ‎11-09-2009
Location: Dubai
0

Re: Y550 Virtualization Problem!!

We are all waiting for you middleton. People's lives depend on your solution :smileytongue:

 

and may one of the customer service persons answer me: why the heck did you disable the vt feature???? i just want an answer.

Token Ring
middleton
Posts: 160
Registered: ‎10-30-2009
Location: Russia
0

Re: Y550 Virtualization Problem!!

Hello guys!

I've found the solution. The complete guide will be ready very soon.

Paper Tape
mudy1
Posts: 2
Registered: ‎11-09-2009
Location: Dubai
0

Re: Y550 Virtualization Problem!!

You mean for the Y550???

 

Well thanks alot for your efforts dear middleton. I solveed my problem by installing xp, and now i'm using xp instead of win7.

 

Thanks again :smileywink:

Paper Tape
tbirdguy
Posts: 6
Registered: ‎11-11-2009
Location: USA
0

Re: Y550 Virtualization Problem!!

I would just like to verify that my y550 is now VT enabled thanks to middleton!!!

His bios settings worked great and my XP mode in Win 7 works GREAT!!

 

Screen Shot (new window)

 

thanks again man, I really appreciate it!

Punch Card
Solaris_irc
Posts: 6
Registered: ‎11-05-2009
Location: Mexico
0

Re: Y550 Virtualization Problem!!

[ Edited ]

I can barely wait for the gide hehe

Token Ring
middleton
Posts: 160
Registered: ‎10-30-2009
Location: Russia
0

Re: Y550 Virtualization Problem!!

I've already written the guide and now i'm waiting for email reply from an owner of Y550.

Let me explain. Two guys received my instructions about activating VT by email. For tbirdguy all worked fine, but peduhpan couldn't activate VT. But after a while he sent email in which he said that after redoing all my instructions again, VT was finally activated on his laptop. Now I'm waiting for email from him to understand why he failed in enabling VT at first.

Token Ring
middleton
Posts: 160
Registered: ‎10-30-2009
Location: Russia
0

Re: Y550 Virtualization Problem!!

Y550 owners! I've just received very interesting information. Could you do the following:

Go into BIOS Setup and on the Exit tab press Load Setup Defaults, save changes and reboot to Windows. Then read this post and write here your results.

Paper Tape
beker
Posts: 4
Registered: ‎11-06-2009
Location: turkey
0

Re: Y550 Virtualization Problem!!

i did it and the results are the same.

 

edx: 0x00000000

eax: 0x00000009 for both cores.

 

give us the good news :smileyhappy:

Token Ring
middleton
Posts: 160
Registered: ‎10-30-2009
Location: Russia

Re: Y550 Virtualization Problem!!

[ Edited ]

OK. First of all let me explain some things. After the analysis of BIOS I found code which performs VT initialization. BIOS enables virtualization if it finds VT capable CPU and if two BIOS variables are not equal to zero. So we have to change values of these variables from zero to one. To do that we will use the official Phoenix utility symcmos.exe so don't be afraid.

Here is the guide how to do that:

- create bootable flash media.
- download archive "VT-Lenovo_Y550.zip" from here.
- copy all files from archive on the flash drive.
- boot from flash media to DOS.
- at the prompt type "dump" and press enter.
- a file "nvram.txt" should be created and you'll see text editor window.
- find two BIOS variables in text and replace their values from 0 to 1.

 

  Be careful, these variables are different for different BIOS versions:

  (0372) and (0375) for BIOS version (V1.04);

  (0375) and (0378) for BIOS version (V1.06);

  (0378) and (037B) for BIOS versions (V2.01), (V2.03), (V2.05), (V2.07), (V2.08);

 
- if you cannot find variable then type it yourself;

  here is the example how it should look for BIOS version (V2.03) :

 

  ........

  (035A) [0002]
  (0369) [0000]
  (036C) [0000]
  (036F) [0001]
  (0378) [0001]
  (037B) [0001]

  (037E) [0000]
  (0381) [0000]
  (0384) [0001]

  ........

 

- press ctrl-F2 and save the file as "vt.txt" (nvram.txt will keep your original settings).
- close text editor (press alt-X).
- at the prompt type "save" and press enter.
- power off your laptop.

- wait for a while, power on and check your VT.

In case you don't know how to create bootable flash media:

 

1) Download this archive Bootable_Flash_Drive.zip.
2) Backup your flash drive.
3) Unpack win98boot.zip somewhere on your drive (e.g. C:\WIN98).
4) Install SP27608.exe.
5) Run HP USB Disk storage tool as administrator.
6) Check Quick Format, check Create a DOS startup disk, click on ... and select the folder with unpacked Win98 boot files (e.g. C:\WIN98).
7) Click on Start and let it finish.

If your VT is still OFF after procedure, try to Load Setup Defaults in BIOS setup utility. Sometimes it's necessary to repeat procedure to finally activate virtualization.

 

If you want to swap FN - CTRL keys on your keyboard, then check this thread:

http://forums.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/FN-CTRL-swap-on-Lenovo-Y550-keyboard-SOLV...