solution for updating graphic cards for y560 with switchable graphics only [catalyst 11.3] [ Edited ]

[yigit]

unofficial solution for updating graphic cards for y560 with switchable graphics only

leshcat wrote:

installation instructions only for x64 systems:
install ready driver plus (included in package). configure it to disable "driver signature enforcement".  read this
I. run unpacker. configure driver and start installation.
II. reboot even if not promted.
III. enjoy benefits of my new set.
 

new 11.3 driver links:

x64:http://www.4shared.com/file/wYBKRmKc/amd_11-3_win7_Multi4_sg_x64.html

x86:http://www.4shared.com/file/UCpvzBaU/amd_11-3_win7_Multi4_sg_x86.html

 ----------------------------

installation instructions (x64):

install "ready driver plus" (also included with x64 driver). this application should help you to automate windows booting settings to “disable driver signature enforcement” forever.

1. delete previous driver via windows control panel. reboot.

2. find on web and install "driver sweeper" (latest version on 4.02.11 - 2.8.5) application.

3. reboot in safe mode. clean remains of old ati driver with "driver sweeper".

4. boot in normal mode.

5. reboot again when system is fully loaded (just in case).

6. start installation of 11.1a. reboot even if not promted.

7. enjoy your new ati ccc2 with lots of new features and fresh intel driver.

----------------------------------------------------------------------------------------------------------------------------------------------------------------

10.12

installation instructions (x86):

1. make a clean install of lenovo 8.752 driver. ( don't forget to switch on the switchable graphics option in bios before )

2. install this drivers. accept unsigned driver installation.then manually reboot if not prompted.

3. enjoy new ccc & ati dd + some more nice add-ons like hydra-vision etc.

installation instructions (x64):

1. make a clean install of lenovo 8.752 driver. ( don't forget to switch on the switchable graphics option in bios before )

2. before install i strongly recommend you to use ready driver plus (included in archive). this application should help you to automate windows booting settings to forever “disable driver signature enforcement” .

2.1 or be sure to boot with f8 -> “disable driver signature enforcement” before installing this drivers & every time you reboot the system.

3. install this drivers. then manually reboot if not prompted.

4. enjoy new ccc & ati dd + some more nice add-ons like hydra-vision etc.

new 11.2 driver links:

x64:http://www.4shared.com/file/amgA67j3/ATi_AMD_11-2_win7_Lenovo_Y560_.html

alternate:http://www.4shared.com/file/JXXKl_PR/11-1_win7_Lenovo_Y560_x64.html

x86:http://www.4shared.com/file/9QutBpyV/ATi_AMD_11-2_win7_Lenovo_Y560_.html

alternate:http://www.4shared.com/file/BuECk6yB/11-1_win7_Lenovo_Y560_x86.html

note: if links appeared to be dead, just reload the download page. 

new 10.12 driver links :
x64:http://www.4shared.com/file/StxVn878/10-12_win7_64_Lenovo_Y560.html
x86:http://www.4shared.com/file/W1dTgzll/10-12_win7_32_Lenovo_Y560.html
old 10.10e driver links :
x86: http://www.4shared.com/file/g5vp5ooo/amdati1010elenovoy560sgonly.html
x64: http://www.4shared.com/file/mkpmpom9/amdati1010elenovoy560sgonlyx64.html
x64: http://www.4shared.com/file/yjx9_kFP/AMDATI1010eLenovoY560SGONLYx64.html
x64: http://rapidshare.com/files/433631048/AMD.ATI.10.10e.Lenovo.Y560.SG.ONLY.x64.exe

*quoted

http://forum.lenovo.com/t5/IdeaPad-Y-U-B-V-and-Z-series/Y560-graphics-drivers/td-p/289278/page/11

http://forum.lenovo.com/t5/IdeaPad-Y-U-B-V-and-Z-series/Y560-graphics-drivers/td-p/289278/page/12

*credits are going to user asder00 from "guru3d" for modding the 10.10e driver making it "mobility", and a little bit for me for extra modding to support sg function.

edit for credits & subject.

edit 2 : new link added. 

edit 3 : version & links updated. 

edit4 : updated links to 11.2 

edit5 : updated links to 11.3   

[boontz]

yeah, it works like a charm link to image

link fixed & subject edited.

[milostodorovic]

I followed all step as above andin graphics software info in ATI CCCit says I have 8.782 driver version, and 10.10 ati cc version!!!Any ideas why?Thank you

[markozutic]

i have latest official lenovo drivers installed 8.752
and i want to update to this 10.10e,
should i reisntall lenovo drivers 8.752?
Or totaly remove them and then install 10.10e?
thanks

[leshcat]

@milostodorovic

Because the 10.10e catalyst was used, NOT 10.11. (bad formating of my post though )

@markozutic

if you never reinstalled The Lenovo Driver (like clean install of windows->Lenovo Driver) you can skip step 1. Then, depending on your system architecture, you just have to follow the manuals that are written upper . (once again,someome made bad format of my post . Btw, Hi,  yigit)

[markozutic]

listen, i have installed recently latest lenovo drivers, now my question is shell i completely remove them, then reboot, and then install new 10.10e drivers? thanks

[leshcat]

no, you dont remove the Lenovo's driver. Just start install of Custom one. BE WARNED: IF YOU USE x64 SYSTEM - read manual carefully.

[markozutic]

yes i use x64 system, and i installed that program that removes driver signature check, should i boot with it now again before installing it ?

ok so dont touch lenovo drivers, just overwrite them, thanks!
will report when finish

[leshcat]

yes, the reason of existence of this app, is to remove the driver signature enforcement forever.

[markozutic]

ok mate i did it and installed went fine, and in end of installation it says Instalation complete (warnings occured during installation) view log file
Log says all are fine but 

 Final Status: Fail Version of Item: 8.782.1.0000 Size: 90 Mbytes