02-25-2011 04:39 PM
Recently, the left hinge on my y510 broke which, in turn, tore the inverter cable.
When this happened, the laptop flashed on and off a few times then went dead.
I got the inverter cable soldered at a repair shop for around $50(!), but after replacing it, the laptop still wont turn on.
even with the charger in, none of the lights glow like usual, I've tried everything, charging it, holding down power button, making sure every cable is connected and nothing else is burnt, but I still havent been able to get a response from the laptop.
What could be causing the problem? is there anything I could do to fix it? I really need this laptop working soon
Solved! Go to Solution.
02-26-2011 11:13 AM
It might be possible too that the inverter cables are still soldered together. Disconnect the inverter, and see if the lights come on. If so, take it back to the repair shop because they buggered up.
03-12-2011 08:28 AM
well, it turned out that when the cable broke, it caused the motherboard to short out..
So the motherboard is fried, computer doesn't respond.
I had to buy a new laptop, got an HP Pavillion.
Definitely wasn't going to go with Lenovo again. Cmon, a 2 year old laptop breaking beyond repair? That's not exacty the kind of quality I'm looking for.
Anyways, I'm just going to part this one out. If anyone needs a y510 LCD screen or super-multi dvd drive, msg me