03-05-2008
02:11 PM
- last edited on
03-16-2011
04:38 AM
by
yigit
Why does my Hard Disk Drive (HDD) capacity appear to be smaller than expected?
(This tip applies to Lenovo 3000 Y410, IdeaPad Y510, IdeaPad Y710, and Lenovo 3000 K100 Desktops)
ffice
ffice" prefix="o" />
Lenovo creates three partitions on the installed Hard Disk Drive:
1. The smaller drive commonly known as the C drive which contains Windows and your pre-installed software. The C drive should NOT be resized otherwise your OneKey recovery may no longer operate.
2. The larger drive known as the D drive which is ready for storing your personal data files such as videos, music, pictures etc. Both the C and D drives are visible in Windows but the D drive is MUCH larger to hold all your personal data. The C drive should NOT be resized otherwise your OneKey recovery may no longer operate.
3. The Service Partition (the partition without a drive letter) is used by the OneKey recovery system to backup and recover the C partition. This invisible partition requires only 18GB to 20GB of HDD space. The service partition should NOT be deleted otherwise your OneKey recovery will no longer operate.
One advantage of having these partitions is the protection of your personal data. In the event you need to use the OneKey recovery system, the personal data stored on the D drive will not be erased as the files on the C drive are restored.
Disk Management is an installed tool which will allow you to view these three partitions. You may access Disk Management by selecting Control Panel -> Management Tools -> Computer Management -> Disk Management.
* Actual size of the invisible partition may vary based on the model and preload.
04-05-2008 05:01 AM
05-21-2008 07:00 AM
05-21-2008 11:16 PM
06-12-2008 06:06 PM
06-14-2008 09:40 PM
06-16-2008 08:00 AM
10-04-2008 01:08 AM
mARK,
FYI, I'm from Malaysia, my Lenovo G410 is a brand NEW.. there is some software crashes and i try to use the easy recovery to recover my system.. but when i presss the novo key what i get is a screen. i follow the instruction to end but it prompted partation defference with factory setting.. unable to proceed.
i do not know whAT IS WRONG BUT I'M INDEED crazy bout this already..
10-14-2008 05:21 PM
Mark;
I have a Y410 that now has a full C drive and a mostly empty D drive due to the Novo partition.
Please advise as to how I can move programs from D to C so that I might be able to run programs for new applications( I keep receiving a message indicating that there is not enough space to run a program).
I have tried to move programs from C to D via a drag-and-drop and am unable to delete programs from C after moving to D--therefore I am unable to increase the size of available space on C drive.
My only other option is to delete the partition and lose the Novo option.
Thank you.
John Stephens
10-18-2008 03:37 PM
hi,
i am using a 3000 y410 56Q, this came with novo option. since i changed the partition of c-drive,i couldn`t use the Onekey Recovery option. Is there any way to sort it out. Can i know the default size of the c-drive to resume the Novo key or if ther are any other options to do the recovery working .
regards,
Chaitu