Reply
Active Member
axel_s
Posts: 9
Registered: 07-07-2008
Location: germany
0

N200 Windows 7 problem with card readers

Hello,

I recently installed W 7 pro, and nearly everything works fine except the built in card reader.

The first error W 7 reported, was a missing base device driver for PCI-bus 8,device 6, function 2 and 3. I found a thread here, to install/update the card reader driver manually, the error disapeared, (although the drivers from the lenovo site are from 2007) . But the card reader does´nt work, if I insert a SD-card, the the green light blinks, there is a systemsound and thats all.

Any hints ?

Is there another newer driver (W 7) from Lenovo or Ricoh which might work ?

 

Greetings

 

Lenovo 3000 N200, 0769-erg, Windows 7 Professional

Advisory Member
Duck3
Posts: 357
Registered: 07-13-2009
Location: USA
0

Re: N200 Windows 7 problem with card readers

Did you try the one from THIS page?

(Ricoh Multi Card Reader)

 

If not, uninstall the current one first, and give it a try.

My Laptop: 3000 N100 0768
Upgraded with T5600 C2D and 250 GB HD
Active Member
axel_s
Posts: 9
Registered: 07-07-2008
Location: germany
0

Re: N200 Windows 7 problem with card readers

Hi,

I tried it twice, the first time I forgot to uninstall the drivers, as a result the reader read a 4GB Toshiba SDHC Card, but was telling me, it has to be formatted. This Card was formatted in a Canon ixus and even the old Thinkpad z60m accepts it. So I uninstalled the drivers and ran the setup.exe from that zip-file.

No other reaction as before, some blinking 2 or free system sounds after insertion of a Card.

Is it possible to use some drivers, directly from Ricoh ?

 

Greetings

Axel

 

Lenovo 3000 N200, 0769-erg, Windows 7 Professional

Advisory Member
Duck3
Posts: 357
Registered: 07-13-2009
Location: USA
0

Re: N200 Windows 7 problem with card readers

Is it possible that the reader will not read SDHC? Only SD?

Do you have a 2GB or less card to try?

My Laptop: 3000 N100 0768
Upgraded with T5600 C2D and 250 GB HD
Active Member
axel_s
Posts: 9
Registered: 07-07-2008
Location: germany
0

Re: N200 Windows 7 problem with card readers

Hello,

I tried it with an 32MB SD-Card, with the same result.

 

Axel

 

Lenovo 3000 N200, 0769-erg, Windows 7 Professional

Advisory Member
Duck3
Posts: 357
Registered: 07-13-2009
Location: USA
0

Re: N200 Windows 7 problem with card readers

Any updates for hardware in Windows Update?

Axel, I am stumped.

My Laptop: 3000 N100 0768
Upgraded with T5600 C2D and 250 GB HD
Active Member
axel_s
Posts: 9
Registered: 07-07-2008
Location: germany
0

Re: N200 Windows 7 problem with card readers

No updates concerning hardware.

 

I´ll try to get some other cards and test if it reads any kind of them.

Maybe the hardware is defective.

 

Greetings

 

Lenovo 3000 N200, 0769-erg, Windows 7 Professional

Active Member
JessicaD42
Posts: 13
Registered: 07-28-2009
Location: California
0

Re: N200 Windows 7 problem with card readers

Axel_s,

Prior to migrating to Windows 7 did you run the Windows 7 Upgrade Advisor? 
To determine if your current computer configuration will be compatible with Windows 7 please go to the following link: http://tinyurl.com/no4xb7

Another resource to verify compatibility is available at the Microsoft Windows 7 Compatibility Center located at the following link: http://bit.ly/1gW6Ns

Jessica
Microsoft Windows Client Team

 

 

Active Member
axel_s
Posts: 9
Registered: 07-07-2008
Location: germany
0

Re: N200 Windows 7 problem with card readers

I did so in , the result concerning Windows 7 32bit was:

 

Ricoh Memory Stick Host Controller  Status:Check Windows Update

Ricoh OHCI-konformer IEEE 1394-Hostcontroller   Status:Compatible

Ricoh SD/MMC Host Controller  Status:Check Windows Update

Ricoh xD-Picture Card Controller: Status:Check Windows Update

(All were checked in green, so I did´nt worry at that time)

 

I tried some other cards, none of them recognized.

 

Greetings

 

 

PS: Before rolling back Windows 7 to scrubby Vista, I´ll get me an external cardreader.