Support in other languages: 
Showing results for 
Search instead for 
Do you mean 
Reply
topmahof
Posts: 3,187
Topics: 35
Kudos: 354
Solutions: 238
Registered: ‎01-21-2010
Location: Etters, PA
0

Re: Windows Update 80072EE2 after Factory recovery

How about opening your network connection from network and sharing center and seeing how fast your connection is.

 

I had one once where the network card wasn't seated too good and it started dropping packets big time and my connection dropped from 100 mbps to about 15 mbps.  

You probably already tried another cable, right?

 

 

_______________________________________________________
T430u, x301, x200T, x61T, 2-x61s, x60T, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga 10
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English English Community   Deutsche Deutsche Community   Español Comunidad en Español   ru.gif Русскоязычное Сообщество
Fanfold Paper
nasroo7
Posts: 13
Registered: ‎02-28-2012
Location: Florida
0

Re: Windows Update 80072EE2 after Factory recovery

100mbps for the speed.

did a check speed connection, and it was fast, like 10mbps download, and 980kbps upload...

yes I tried different cables, and also connected other laptops to the same cables to check if they can access microsoft websites, and check for updates. And they did it successefully.

topmahof
Posts: 3,187
Topics: 35
Kudos: 354
Solutions: 238
Registered: ‎01-21-2010
Location: Etters, PA
0

Re: Windows Update 80072EE2 after Factory recovery

Your connection speed is as good as mine.

 

How about your power plan?  I don't remember what Vista uses for power plans.  What's set in Control Panel as far as power plans?  Whatever it is, make sure it's set for High Performance.

 

You could also try going into the bios and resetting it to its defaults.  I don't know why anything would have changed in there though.  Something is hamstringing the connection.

 

Dave 

_______________________________________________________
T430u, x301, x200T, x61T, 2-x61s, x60T, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga 10
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English English Community   Deutsche Deutsche Community   Español Comunidad en Español   ru.gif Русскоязычное Сообщество
Fanfold Paper
nasroo7
Posts: 13
Registered: ‎02-28-2012
Location: Florida
0

Re: Windows Update 80072EE2 after Factory recovery

Already tried HighPerformances, and I left it there.
Already changed the BIOS settings to defaults. also tried on "Optimized settings"

but still the same thing
topmahof
Posts: 3,187
Topics: 35
Kudos: 354
Solutions: 238
Registered: ‎01-21-2010
Location: Etters, PA
0

Re: Windows Update 80072EE2 after Factory recovery

When you were able to do some updates, were you able to put Net.Framework on there. 

 

I'm running out of ideas.

 

Dave

_______________________________________________________
T430u, x301, x200T, x61T, 2-x61s, x60T, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga 10
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English English Community   Deutsche Deutsche Community   Español Comunidad en Español   ru.gif Русскоязычное Сообщество
Fanfold Paper
nasroo7
Posts: 13
Registered: ‎02-28-2012
Location: Florida
0

Re: Windows Update 80072EE2 after Factory recovery

Yes, it installed successfully some .Net Framework, but only version 2 and 3.
The version 4 didn't not show up in the list (Usually it shows up after all the updates being installed)
Fanfold Paper
nasroo7
Posts: 13
Registered: ‎02-28-2012
Location: Florida
0

Re: Windows Update 80072EE2 after Factory recovery

I also thought about the Net Framework, so before I reinstalled Windows for the 3th time, I downloaded the NET Framework remover tool from microsoft (another laptop) and removed all Frameworks presents (only 2 and 3 were installed)
Because I was able to download the first 108 updates, after the second windows install, and the last one (4th)
Fanfold Paper
nasroo7
Posts: 13
Registered: ‎02-28-2012
Location: Florida
0

Re: Windows Update 80072EE2 after Factory recovery

And all NET Framework installed from the update were successful
topmahof
Posts: 3,187
Topics: 35
Kudos: 354
Solutions: 238
Registered: ‎01-21-2010
Location: Etters, PA
0

Re: Windows Update 80072EE2 after Factory recovery

Go into Event viewer, applications and services, and open Media Center.  Expand the page and choose details, friendly view.

 

Media Center tests the internet connection a lot and it retrieves things like the sports schedule and updates.

 

See if there were any problems anywhere in there.

 

 

_______________________________________________________
T430u, x301, x200T, x61T, 2-x61s, x60T, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga 10
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English English Community   Deutsche Deutsche Community   Español Comunidad en Español   ru.gif Русскоязычное Сообщество
Fanfold Paper
nasroo7
Posts: 13
Registered: ‎02-28-2012
Location: Florida
0

Re: Windows Update 80072EE2 after Factory recovery

Ok,
didn't try that.
I'll do it, and post a reply later. It maybe going to take few days before I can do it, because I'm not with the desktop now.

But thank you a lot for your help.
I will post an answer as soon I can do it.