Fn-F7 problem

[Grantf62]

I changed some monitor settings after pressing the Fn-F7 key, and now when I press these buttons, the screen only flashes at me.  How do I reset the function keys so that when I hit Fn-F7, the menu comes up again?  Thanks.

[Ron_9972 Support Specialist]

What model do you have and what OS are you using?  Depending on the model and OS, you can reset the FN+F7 in Presentation Director.

Here is the download for Presentation Director for Windows 2000, Vista, and XP:

http://support.lenovo.com/en_FI/downloads/detail.page?DocID=DS001661

The installation instructions are on this page.  As this page shows, you will also need:

To enable Fn+F7 on-screen key function, it is also required to install the following packages:

• Power Management Driver for Windows Vista, XP, 2000, Me, 98 SE.
• Hotkey driver for non-ThinkPad notebooks or
  Hotkey Features Integration for ThinkPad notebooks
  (Note) If Hotkey Features version 2.20 or later is installed on your system, install Presentation Director 4.04 or later

[Grantf62]

I have an SL500 using Vista home.

[Ron_9972 Support Specialist]

Great.  Try downloading Presentation Director and see if you can reset it.  Let me know if that works.