07-02-2010 07:37 PM
Hello~ I am using Windows 7 Ultimate on my Lenovo T500. My microphone suddenly stopped working. Why is that? It is not detecting any sound at all in the microphone setup screen or on skype even though it is the only device and it is selected. I have Conexant 20561 Smartaudio HD and drivers 184.108.40.206 released on 10/6/2009. It just recently stopped working. No sound is detected. Help! Thanks
Solved! Go to Solution.
07-31-2010 04:54 AM
I also facing the same problems, I will just add more into that as follow:
OS: Windows 7 Ultimate (64bit)
Audio: Conexant 20561 SmartAudio HD (Version 220.127.116.11 Dated: 10/6/2009)
When I restart computer and loginto Skype first call is ok than second call mic volume is dramatically decreases and finally no mic.
I when to windows control panel to further investigate the issue, and chose to setup microphone in speech recognition, it does not listen (it does detect the microphone but can't listen) after few tries it works.
Than i googled my problem and got this answer from Lenovo ( http://www-307.ibm.com/pc/support/site.wss/documen
Where it says:
Conexant Audio Driver for Windows Vista (32-bit, 64-bit)
And it states the fixes about following:
Version 18.104.22.168 (Vista) / 22.214.171.124 (XP)
Now i think Lenovo should do some thing about it.
08-01-2010 02:06 PM
OMG, that 's exactly what happened to me. I have tried with older drivers and everything works!! But the only problem is not WQHL certified. My windows 7 has problem to load it. So definitely it is the driver problem. LENOVO, DO SOMETHING!!
07-07-2011 06:08 AM
i was able to fix this problem by going to the skype ( tools->options->audio settings ) menu
and then unmarked the "automatically adjust microphone settings" mark box.
Afterwards i re-adjusted the microphone sensitivity
by: ( going to sound in the control panel -> recording -> i then double clicked the internal mic -> levels )
and here you can adjust the boost and sensitivity
08-11-2011 02:46 PM
I had the same problem.
Control Panel > Speech Recognition > Advanced speech options > Microphone > Advanced...
And checked real Conexant 20561 SmartAudio.
After that action my microphone will start working properly.
09-14-2011 08:17 PM
It seems that the Conexant 20561 drive doesn't work well in windows 7.
The only way I could fix it was to unistall the driver then reboot. Windows 7 put a generic driver in that works fine.
01-12-2012 07:36 AM
02-01-2012 06:26 AM
I recently had the same problem with my Lenovo G560 notebook running windows 7. I think the driver had become disabled and I could not enable it or detect the microphone until I did the following
Go to Control Panel
Systen and Security
Trouble Shoot common computer problems
Hardware and Sound
Trouble shoot audio recording
Page then says 'Recording audio'
Page then says 'Detecting Problems'....
follow on from this
02-06-2012 01:41 PM
I have a thinkpad x201i, but the same Conexant 20585 SmartAudio HD.
The microphone is activated, both volumes are at max, I disabled the audio enhancement as adviced here and also tried the "action center" trick. But none of these worked.
I use to skype a lot with it, sometimes I wouldn't work and then during the conversation work again. I also changed skype's settings as adviced here :
disabled the "windows detects communication" option too.
I've downloaded the latest driver from lenovo
uninstalled the material, earased the .inf files form windows/inf folder so I can install the driver I want (couldn't get the default windows driver though..maybe a hint but I don't know how to do this)
none of the above worked.
The sound indicator next to the microphone in the recording device tab reacts when I clap my hand very hard, the level seems to be very very low, but I can't find how it's possible.
Thank you for your help,
02-11-2012 08:44 AM
I have the same problem. I'm using a lenovo T400 with Conexant 20561 and Windows 7. My micro isn't working at all, although windows doesn't recognise any problems (device working properly), it don't record anything. I tried all proposed changes, clicked everything on and off (automatic volume adjustion etc.), no effect. I'm a little bit lost here, no idea what else I could do. Is there anyone who could help me??
How do I know if it's a software (driver for example) or a hardware problem?
Thanks to everyone in advance!