11-30-2009 11:42 PM
When I enable Intel VT in bios and later try to use Windows Virtual PC (or Hyper-V) the performance is really slow. If I disable Intel VT and use the old Virtual PC performance is better.
Anyone that have experienced the same issue? I have the latest bios installed and running Windows 7 (tried with both 32-bit and 64-bit).
12-01-2009 05:06 AM - edited 12-01-2009 05:08 AM
I never had to complain about the performance. But I never tried to disable it in the bios. will try it later this week.
although I'm not sure if I would ever spot a difference, I can run 2 XP virtual machine simultaneously without any problem (the windows 7 host and the 2 XP VM are on a SSD disk though)
04-23-2011 10:13 AM
I realize the thread is old but maybe someone will find this and save themselves some time
The issue is caused by turning off some components used when switching between servicing calls for the host (the real machine) and the virtualized environment. Even the latest t400 BIOS has the "problem". At first I was really puzzled - I have a t9900 CPU and a SSD, nothing really makes the machine sweat too much. Yet you would click on a button in a program in the virtual machine and there would be no response or it will be SLOW. All at the same time CPU utilization stays at ~3%.
Try this with steps to fix the issue. No virtual machine should be running (may have to wait a few moments to free up the lock on the files)
1. Locate Options.xml in C:\Users\[YourUserName]\AppData\Local\Microsoft\Wi
1.5 Make a copy of the original just in case
2. Open the file in a text editor and find the section <virtual_machines>...</virtual_machines>
3. Replace the section with this
<virtual_machines> <power> <mm_timer_duration type="integer">10</mm_timer_duration> </power> <enable_idle_thread type="boolean">true</enable_idle_thread> </virtual_machines>
4. Save and start your virtual machine again.
5. Get yourself a cooler pad since each machine will run a CPU core at 100% utilization.
Alternatively, run the laptop in High Performance mode for power settings that turns off the timers that give us trouble.