11-25-2010 12:10 PM
Hi all,
I have some trouble with my T410 USB port. After finished some windows update (i'm using win-7 32 bit) and restart the laptop, suddenly one of USB port (located in the right near the DVD-drive with yellow color inside) doesn't work. I usually connect this USB port for my mouse.
Is there anyone can help me to solve this? I am not sure whether this is driver issues, or hardware problem.
Appreciate for response!
11-29-2010 02:57 PM
I had exactly the same problem, although I am running Windows 7 64 bit. When I checked on system status, it indicated no problems with any of the USB ports. Drivers were okay and updated, as well. I, too, welcome suggestions.
11-29-2010 11:36 PM
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
W520 | 4176-38U | i7 - 2720QM | Quardo 1000M | 8GB RAM | 60GB OCZ Agility 3
01-03-2011 08:12 AM - last edited on 01-03-2011 08:19 AM
I hate to add "me too" posts, but...me too!
The yellow USB port on my T410 stopped working about a week after the purchase. One of the three ports on the left side also stopped working, but the two others kept going.
This morning I came in after the holiday break only to discover that four of the ports on the replicator no longer function (fortunately at least one of them does since my keyboard is plugged in there). So right now, on my 4 month old lap top with a port replicator, ony 4 out of 10 USB ports are working...that's pretty sad.
Device manager shows no problems.
T410. Windows 7/32
We purchase a lot of these units, it's the standard laptop that we're issuing to employees. I'm going to see how many others have had similar problems. If I find it's widespread we'll have to switch to another brand, we can't afford to have our folks fooling around with their computers instead of getting the job done.
01-03-2011 10:06 PM
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
W520 | 4176-38U | i7 - 2720QM | Quardo 1000M | 8GB RAM | 60GB OCZ Agility 3
01-24-2011 02:49 PM
Had same issue.
Yellow USB port not working at all. Three USB ports on left hand side were not working properly either - for example my Iomega external USB drive was not recognised by Iomega encryption software.
Fixed (after long time looking at USB devices, thinking that they/ cables were the problem..) by deleting USB drivers in device manager and then rebooting and re-installing.
However right hand yellow USB port not working again, so will try re-installing USB drivers once again..
Note that I've never had this kind of problem before on a new machine.
01-30-2011 02:50 AM
2 Whom It May Concern!
It may be unconnected to the problem expressed here which I also have but please check Microsoft KB 2416007 "An USB device may intermittently disconnect and reconnect when you use the USB device in Windows 7 or in Windows Server 2008 R2". I get this race condition in the USB driver a lot and find an increasing number of the USB ports go away and stay away. This had the added advantage of disconnecting a USB HDD during backup work and corrupting said HDD.
Microsoft state "A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem that is described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix."
It would be interesting to know exactly which models of T410 are giving which USB problem
03-24-2011 04:15 PM
I was having the same issue and by going to Device Manager->USB controllers->right click->"check for hardware changes" solved the problem of "non-responsive" USB port.
07-10-2011 08:54 PM
Face the same problem here, after 2 months, the yellow one and one in the left is not working any more. Plug anything like flash driver there and only see a flash light at first, then nothing happens.
Solve by myself with this:
Uninstall all USB Enhanced Host Controller - XXXX in Device Manager (under Univeral Serial Bus controller)
The system asks for restart, I don't do so.
Click detect hardware change.
After few flicks and refresh, all drivers are installed again and magically, all USB ports work now.
07-28-2011 04:03 AM
Hi,
if your T410 comes with an UMTS module (Gobi2k - WWAN) it's worth trying to update the Bootcode revision for Win7
http://support.lenovo.com/en_US/downloads/detail.p
It updates the Gobi2k Firmware on older shipments (before 09/2010) on later shipments this code should already be present.
It improves the USB Hub behaviour the Gobi2k is connected to, if you still use XP you have to leave version 3575 in place, but for W7 3599 (see link) is the right choice.
To see whether this might solve your issue, check the device manager to see whether the Gobi device is present or not.
I expect the USB hub missing altogether with the Gobi, hence only the right USB port and one of the left ports is not working (they are on the same bus as the Gobi)
Let me know the results - thanks