10-24-2011 07:09 PM
Hello All,
I undestand some of you are reporting that after ugprading the video driver the adjustment brightness keys are not working properly for the E420s / E420 / E520.
Appreciate if you could let me know here. Also please try uninstalling, power manager, power management driver and hotkeys, reboot then install them back.
If problem persist, just post here or hit the "Me Too" button.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
W520 | 4176-38U | i7 - 2720QM | Quardo 1000M | 8GB RAM | 60GB OCZ Agility 3
Solved! Go to Solution.
10-24-2011 11:11 PM - edited 10-24-2011 11:44 PM
I am sorry for the lame question, but where exactly do i find the hotkey patch to uninstall it.
Thanks.
Edit:
What i uninstalled, was the Interface driver?! I think that is what controlls the hotkeys or am i wrong.
2 Edit:
Uninstalled every thing, installed again. Screen brightness can still NOT be adjusted with the F7 & F8 keys.
Only from the Power Options in Control Panel.
10-27-2011 10:04 PM
Hi Jamez
Is there going to be an updated driver to address this problem?
10-31-2011 01:32 PM
Bump, didn't help, problem is still there.
10-31-2011 01:38 PM - edited 10-31-2011 01:41 PM
I experience the same issue as well.
If you release an updated driver, is it possible to incorporate the current ATI driver version?
10-31-2011 09:08 PM
I got the same problem as well. My machine is E420 (1141)
11-02-2011 01:54 AM
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
W520 | 4176-38U | i7 - 2720QM | Quardo 1000M | 8GB RAM | 60GB OCZ Agility 3
11-22-2011 04:00 AM - edited 11-22-2011 04:03 AM
Hello
Will there be any solution for this ? The problem exists, when system uses Radeon graphics only.
11-24-2011 12:13 AM
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
W520 | 4176-38U | i7 - 2720QM | Quardo 1000M | 8GB RAM | 60GB OCZ Agility 3
11-25-2011 04:14 AM
Nope, new BIOS does nothing.
But if I put brightess to maximum and press F8 (increase brightness) it shows me that brightness is full (15).
And same thing with minimum brighness pressing F7. (Not sure if that was there in the other BIOS)
I still can't change it though.