10-03-2010 01:40 PM
I`ve got an Edge 15" Corei5 with Win7 and a problem with the working Wake on LAN setup.
The Edge wakes up from any state it`s in. Turned off, sleep, hibernation. My question is how to disable wake up from turned-off-state.
It would be nice when waking up would only be enabled when the machine is is sleep or hibernation mode.
Where can I switch this behaviour?
Regards nicbeu
10-03-2010 07:44 PM
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
W520 | 4176-38U | i7 - 2720QM | Quardo 1000M | 8GB RAM | 60GB OCZ Agility 3
10-04-2010 01:50 AM
Thank you very much for your quick answer.
Unfortunately I cannot find that switch. Could you tell me where exactly in BIOS?
regards nicbeu
10-04-2010 01:55 AM
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
W520 | 4176-38U | i7 - 2720QM | Quardo 1000M | 8GB RAM | 60GB OCZ Agility 3
10-04-2010 04:38 AM
I will try your proposal in two days when i`m back in front of that laptop. For a plan b it might be helpful to know the BIOS settings...
Again many thanks!
![]()
regards nicbeu
10-06-2010 01:59 AM
10-06-2010 02:02 AM
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
W520 | 4176-38U | i7 - 2720QM | Quardo 1000M | 8GB RAM | 60GB OCZ Agility 3
10-06-2010 02:23 AM - edited 10-06-2010 02:46 AM
OK. I switched the BIOS settings to the default, disabled WoL in Devicemanager for the LAN Card (Realtek...) and turned it off. Sending the magic packet to it wakes it up again! The settings in device manager had changed!
Same situation as before...:-(
regards nicbeu
10-06-2010 03:00 AM
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
W520 | 4176-38U | i7 - 2720QM | Quardo 1000M | 8GB RAM | 60GB OCZ Agility 3
10-06-2010 03:05 AM