Hi,
Each night we get a tonne of odd messages from the raid controller in our RD220. The controller is the MR10i.
We've had nothing but problems with this raid setup since inception. New backplanes, new splitter, new cables etc. Most issues have gone but these errors are worrying.
Controller ID: 0 PD Reset: PD = Int.Ports 4-7:1:5, Error = 3, Path = 50:05:07:60:1c:81:0a:6a Generated on:Tue Feb 08 00:50:20 2011
Controller ID: 0 Command timeout on PD: PD = Int.Ports 4-7:1:5 - No addtional sense information, CDB = 0x2a 0x00 0x30 0xba 0x02 0xa8 0x00 0x00 0x08 0x00 , Sense = 50:05:07:60:1c:81:0a:6a, Path = Generated on:Tue Feb 08 00:50:20 2011
Controller ID: 0 PD Reset: PD = Int.Ports 4-7:1:5, Error = 3, Path = 50:05:07:60:1c:81:0a:6a Generated on:Tue Feb 08 00:54:47 2011
Controller ID: 0 PD Reset: PD = Int.Ports 4-7:1:5, Error = 3, Path = 50:05:07:60:1c:81:0a:6a Generated on:Tue Feb 08 00:55:04 2011
Controller ID: 0 Command timeout on PD: PD = Int.Ports 4-7:1:5 - No addtional sense information, CDB = 0x28 0x00 0x0a 0xd9 0x60 0x80 0x00 0x00 0x08 0x00 , Sense = 50:05:07:60:1c:81:0a:6a, Path = Generated on:Tue Feb 08 00:55:21 2011
Controller ID: 0 PD Reset: PD = Int.Ports 4-7:1:5, Error = 3, Path = 50:05:07:60:1c:81:0a:6a Generated on:Tue Feb 08 00:55:21 2011
The array itself shows as online and disk checks show that the filesystem is fine.
Any ideas as to the cause?
Olly
