Lenovo ThinkServer TS200 6525-11G and would like to install Windows Server 2008 x64 on this Server.
After starting up it only displays:
IMM Memory initialized
IMM Kernel loading
IMM Kernel running
Remote Power Control available
Thermal Management online
Flash Manager ready
Remote Video Engine online
IMPI Sensor scan ready
Ready for uEFI Initialization
What are now the next steps to install Windows ? Suppose this is a RAID config ?
The IMM says:
The System "SN#-----" encountered a firmware hang
If you have multiple HDDs and you want to use RAID, you need to setup RAID before installing the OS.
On the TS200, you do this through BIOS Setup:
- Click F1
- Go to System Settings
- UEFI adapters
- Refresh adapters
- Select the RAID adapter
- follow prompts to configure RAID
Then install the OS using DVD.
- During boot, insert the DVD
- Hit F12 to boot to alternate media
- Follow prompts to install the OS.
Consider updating the firmware using the following:
Burn the ISO and boot to it by hitting F12 and selecting the optical drive as startup device from the list.
© All Rights Reserved