Support in other languages: 
Reply
Token Ring
sckl
Posts: 16
Registered: ‎05-07-2008
Location: Austria
0
Accepted Solution

AC 5.21/5.30 - Profile Deployment - WPA Key

Hi Together,

 

I'm currently tuning our setup for installing our new T400 laptops, and I'm haning at the location profiles. I want to include the WPA Key in the LOA File, everywhere is written that its no problem, but I actually can't find a point to add it / README to get trough it....

 

Can somebody may give me a tip?

 

I tried it by adding the saved REG part for the Key, but thats not working... 

 

 

Thanks in advance!

 

Kind Regards

 

Klaus

Token Ring
sckl
Posts: 16
Registered: ‎05-07-2008
Location: Austria
0

Re: AC 5.21/5.30 - Profile Deployment - WPA Key

any ideas?
Lenovo Staff
LANOgre
Posts: 286
Registered: ‎11-28-2007
Location: North Carolina, USA
0

Re: AC 5.21/5.30 - Profile Deployment - WPA Key

WHen creating a deployment, already have the WPA-PSK profile created.  Then when you go into the deployment too, you check the created profile for deployment.  At that point, it will prompt you to re-enter the key.

 

Try looking at the deployment guide for further information...

 http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-52881

Token Ring
sckl
Posts: 16
Registered: ‎05-07-2008
Location: Austria
0

Re: AC 5.21/5.30 - Profile Deployment - WPA Key

unfortunately, there was no popup coming up when choosing the WLAN profile...

 

its working now, the solution/problem was:

 

I used the "AdminEnabler" for winXP in Version 4.xx, as there is no version available for download on the lenovo HP

 

=> I now used the AdminEnabler for WinVista on the WinXP laptop

 

isn't that strange? i thought the Enabler is just ticking a radio box inside the AccConn to show the buttons... 

 

 

Thanks for help