AC 5.21/5.30 - Profile Deployment - WPA Key

[sckl]

Hi Together,

I'm currently tuning our setup for installing our new T400 laptops, and I'm haning at the location profiles. I want to include the WPA Key in the LOA File, everywhere is written that its no problem, but I actually can't find a point to add it / README to get trough it....

Can somebody may give me a tip?

I tried it by adding the saved REG part for the Key, but thats not working... 

Thanks in advance!

Kind Regards

Klaus

[sckl]

any ideas?

[LANOgre]

WHen creating a deployment, already have the WPA-PSK profile created.  Then when you go into the deployment too, you check the created profile for deployment.  At that point, it will prompt you to re-enter the key.

Try looking at the deployment guide for further information...

 http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-52881

[sckl · Accepted solution]

unfortunately, there was no popup coming up when choosing the WLAN profile...

its working now, the solution/problem was:

I used the "AdminEnabler" for winXP in Version 4.xx, as there is no version available for download on the lenovo HP

=> I now used the AdminEnabler for WinVista on the WinXP laptop

isn't that strange? i thought the Enabler is just ticking a radio box inside the AccConn to show the buttons... 

Thanks for help