Support in other languages: 
Showing results for 
Search instead for 
Do you mean 
Reply
Serial Port
Aboulafia
Posts: 41
Registered: ‎08-03-2008
Location: Saint-Martin - Guadeloupe (GMT -4)
0

RESCUE & RECOVERY 4.3 : Impossible to install [Closed]

[ Edited ]

Hello,

 

I upgraded my W700 to Windows Seven Business clean install.

I have the two hdd in raid 0 :

one volume with the system the second for the data.

I don't have a recovery partition (clean install)

The Lenovo software is up to date.

When I try to install Rescue and recovery, at the end of the process it stops : error type 6 (that's mean it can change the partition to active - read in the doc)

 

I really appreciate if somebody can give me the solution.

 

I don't want to buy Acronis or Ghost to do the same job.

 

Thanks

T61P 6460DVU - XP PRO - 3 Gb ram - 320 Gb Hd - 15,4" display
W700 27584SU - SEVEN PRO - 4 Gb ram - 2x320 Gb hd raid 0 - 17" display
Lenovo Staff
Herik
Posts: 1,591
Registered: ‎07-17-2009
Location: Slovakia
0

Re: RESCUE & RECOVERY 4.3 : Impossible to install

Hi,
the common reason for this is a missing of old RAID driver.
Can you please tell me what is the verison of the Matrix(RAID) driver, that you have installed.

Also please let me knwo, what is the SATA configuration in the BIOS.

This is a pure sata driver issue, that RnR cannot read and change the partition table.

So in case you want to get over this without a change to the system, then you can install RnR without having the partition insatlled. You can use this installation command to do it:
setup.exe /vPDA=0

Pelase let me know, any details to this situation, that might help me with this.

Cheers

Serial Port
Aboulafia
Posts: 41
Registered: ‎08-03-2008
Location: Saint-Martin - Guadeloupe (GMT -4)
0

Re: RESCUE & RECOVERY 4.3 : Impossible to install

Thank you for your help.

 

The Intel Matrix Storage Manager is up to date : v8;9;1;1003 ICH9M-E

The raid is enable in the bios.

I have only one raid 0 volume.

I manage a huge free space on the hard drive but this don't change nothing.

 

I always have the Type 6 error at the end of the install.

 

I didn't try to install in the command line.

 

If i do it, I didn't have diagnostic system available ?

T61P 6460DVU - XP PRO - 3 Gb ram - 320 Gb Hd - 15,4" display
W700 27584SU - SEVEN PRO - 4 Gb ram - 2x320 Gb hd raid 0 - 17" display
Lenovo Staff
Herik
Posts: 1,591
Registered: ‎07-17-2009
Location: Slovakia
0

Re: RESCUE & RECOVERY 4.3 : Impossible to install

Hi,

thanks for getting back on this.

 

If you install RnR using the command line, that I provided, then you will have all the options as usual, BUT the RnR virtual partition will not be created and also the boot record of your system will not be changed, which should fix the error, that you are receiving.

 

This of course will also lead to the situaiton, that you will not be able to use the F11 by the system boo to start into the RnR partition, as it will not be installed.

 

Please let me know, if you have tested the installation using this method.

 

Cheers

Serial Port
Aboulafia
Posts: 41
Registered: ‎08-03-2008
Location: Saint-Martin - Guadeloupe (GMT -4)
0

Re: RESCUE & RECOVERY 4.3 : Impossible to install

I apologize for the delay but i have not internet and i have to find a hot spot.

 

Any way, i tried the command line and i have the same error in return.

 

I found a workaround.

 

I came back to no raid sata drive, i made a clean install and like this i installed Rescue and Recovery without problem. I installed it at first before "System Update".

 

I made a new clean install because when i want to restore my image disk of Seven on the hard-drive Windows don't let me do it. Probably because it thinks that it's not the same computer.

 

I will try with R & R. If you change your hard drive and you can't restore the entire system, why make a backup ?

 

Thank you very much for your help

T61P 6460DVU - XP PRO - 3 Gb ram - 320 Gb Hd - 15,4" display
W700 27584SU - SEVEN PRO - 4 Gb ram - 2x320 Gb hd raid 0 - 17" display
Lenovo Staff
Herik
Posts: 1,591
Registered: ‎07-17-2009
Location: Slovakia
0

Re: RESCUE & RECOVERY 4.3 : Impossible to install

Hi,

thank you for your post. It really helped me out.

 

Based on this, it seems to be on 99% an issue of the RAID driver vs RnR.

 

I'll doublecheck this once I'll be back in Lab.

Thanks again.

In case you see this thread as closed, then please feel free to mark it as fixed/closed.

 

Cheers

Serial Port
Aboulafia
Posts: 41
Registered: ‎08-03-2008
Location: Saint-Martin - Guadeloupe (GMT -4)
0

Re: RESCUE & RECOVERY 4.3 : Impossible to install

Some news !

 

I make a new clean install on raid 0 configuration.

 

After installed the os, I installed Microsoft C++ 2005 sp1 and Rescue and Recovery.

 

I can install it without any problem !

 

I don't know that's happened before.

 

I didn't try it yet, but it lunchs and seems to work fine. Strange...

T61P 6460DVU - XP PRO - 3 Gb ram - 320 Gb Hd - 15,4" display
W700 27584SU - SEVEN PRO - 4 Gb ram - 2x320 Gb hd raid 0 - 17" display
Lenovo Staff
Herik
Posts: 1,591
Registered: ‎07-17-2009
Location: Slovakia
0

Re: RESCUE & RECOVERY 4.3 : Impossible to install

Hi,
thanks for the post.
Hmmm, that might be just some configuration issue, or RAID issue.

Really strange.

However, as right now it's working fine, could you please mark this thread as closed.

Thanks
Cheers