06-25-2012 08:01 AM
You could revert to the older BIOS as a test to see if that is the case...
06-25-2012 08:11 AM
06-25-2012 08:36 AM
You're right, for some reason I thought mine was a Vertex.
06-25-2012 09:05 AM
I doubt there's much in it Webo anyway.
To the OP can you post benchmarks of the drives in sata3 and now in sata2?
Curious what the difference previously and now.
06-26-2012 06:54 AM - edited 06-26-2012 06:55 AM
Luckily I had an old benchmark from back when I first intalled the drive.
Here it is from when I first installed the drive and it was operating correctly in SATA III mode.
And here it is now running in SATA II.
06-26-2012 09:26 AM - edited 06-26-2012 09:32 AM
I rolled back to BIOS version 1.36. Still running at 3Gb/s so we can rule that out.
The solution is probably somewhere on the OCZ forum...
or try this:
06-26-2012 12:05 PM
I ran crystalmark on my 120GB Vertex3 in my W510.
I was getting better results than you, do you think there's maybe a problem with your drive?
Have you made all the relevant windows changes?