Support in other languages: 
Reply
Fanfold Paper
chris_nunn
Posts: 2
Registered: ‎04-26-2012
Location: United Kingdom
0

x200 tablet Broken screen help

[ Edited ]

Can someone help?

 

I have a x200t with a damaged screen, I am however very confused:

 

The stickers on the back give the following numbers:

 

wacom: SUR5R-12W13AS-01X

 

Wistron: P/N 60.4Y405.001

 

Samsung: LTN121AP03

 

P/N 42t0565

 

FRU: 44c9666

 

1) Can I just buy a Samsung screen  LTN121AP03, will any other fit?

 

2) If I can buy just the screen where can I find detailed instructions on how to dissemble and transfer the other bits over?

 

3) If I can't transfer the bits as in (2) above what is the part number I should be searching for?

 

4) can I use any x200t or x201 screens and digitizers?

 

 

Any advice would be gratefully received.

 

 

Thanks

 

 

Chris

tanujhanda
Posts: 955
Topics: 3
Kudos: 80
Solutions: 65
Registered: ‎01-05-2010
Location: INDIA
0

Re: x200 tablet Broken screen help

Hello chris_nunn and welcome to community,

 

You can find the Lcd touchscreen service part number from the mentioned below web link.

http://support.lenovo.com/en_US/product-and-parts/detail.page?DocID=PD008437

 

Lcd service part list from mentioned below web link.

http://support.lenovo.com/en_US/product-and-parts/detail.page?DocID=PD008456

 

LCD panel and LCD cable removal and installation detail can be find from mentioned below web link.

http://support.lenovo.com/en_US/product-and-parts/detail.page?DocID=PD003971

 

 

Best Regards,

Tanuj

 


Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Follow @LenovoForums on Twitter!

Fanfold Paper
chris_nunn
Posts: 2
Registered: ‎04-26-2012
Location: United Kingdom
0

Re: x200 tablet Broken screen help

Thanks for the response.

 

I have looked at your links and they treat the screen and digitizer as one part, this is fine if you are able or willing to pay $1100 (£800) for a new part.

 

My questions are around the possibility of separating the broken screen from the working digitizer buying a new screen for $160 (£100)  and reusing the digitizer.

 

Can anyone help.

 

Alternately might I surmise that every X200 with a broken screen is the equivalent of a economic write off!  

 

Thanks

 

 

Chris