02-09-2012 05:34 AM
you saw good . i find the fuse F6 ,it's for the finger print and it's F7 on my systemboard (out) .
I don't find the F1 fuse .it's not my systemboard ,the mine is x61T . it seem but it's not the same
02-09-2012 07:52 AM - edited 02-09-2012 07:55 AM
The fuses are different from model to model and not all are numbered from "1" to "10" etc.
I own a T61t since xmas but i never had opened it
Measure the resistance between the tow soldered ends of the fuses. If "0" the fuse is ok, if "1" or "endless" the fuse if damaged. A new fuse can be soldered onto the old one but it must have the same Ampere-value.
02-09-2012 01:36 PM
Can you make a high resolution pictures from top and bottom in very good quality, upload it to imageshack.us and post the link? Maybe so i can help you seach the fuses
02-27-2012 08:14 AM
Hi , sorry for the delay but now I've got the pictures (first side)
look the fuse f7 near the connector and the button battery .I think it burned
02-27-2012 12:30 PM
02-27-2012 12:50 PM - edited 02-27-2012 12:52 PM
ok , i don't know for the metallics fuses. i check the fuses f5 & f7 ,f2 and f4 (0.004 & 0.008) it' s ok on my system board . F4 --> F11 on the pic , F7 --> F6 , F5 --> F5 ; F2 -->F3 after where 're the others ?
02-28-2012 12:35 AM
On the bottom side of the board also are a couple of fuses.
If the fuses are well, the error seems to be in the display cable or display/digitizer itself. I hope, the pen is well.
02-28-2012 10:57 AM
hi , i continue with the fuses on the other side . The fuses are around the dock connector (F11;F13;F15;F12) and are OK .It's the same for F14 (between cpu & vga connector) I don't find the F1 fuse , is it missing ?
look this pic pls
02-28-2012 11:15 PM
On a X61 (not "t") - board the F1 - fuse will be found near the battery-connector - there is a "F" on the fuse.
That fuse seems nothing to have to do with the display.
So - if no fuse is damaged, no chip has a visible damage the error might be found in the cover (display, digitizer, cable) but i'm not very sure.