My x100e's trackpoint doesn't has press-to-select function!

[Obiwank1]

Recently I got a X100E, everything is fine but the track point doesn't have press to select function. Is there any patch or something to fix this? Thanks

[GMAC-R60 Retired Guru]

make sure it is enabled in the mouse properties & check in BIOs to if it is enabled

[Obiwank1]

there is no press-to-select function under mouse property and there is no such option in my bios settings

[topmahof Community Moderator]

control panel- mouse-trackpoint-there's a setting for enable press-to select

[bananaman]

Hi Obiwank1!

If you see no setting for this under mouse properties, the UltraNav driver is not properly installed. Try re-install:

http://download.lenovo.com/lenovo/content/ddfm/MIGR-74463.html#mouse

Hope this helps!

[steinAK]

Hey topmahof and Bananaman,

My X100e shows no option in BIOS and none in the Mouse properties.

Methinks y'all might be assuming that the X100e trackpoint has that function. I see nothing to exhibit it does, even after a reinstall of trackpoint software (W7x64).

[The_Solutor Guru]

I never seen that option in the control panel, so I suppose that this function is simply not present on the X100's tracpoint

[Yangorang]

---

The_Solutor wrote:

I never seen that option in the control panel, so I suppose that this function is simply not present on the X100's tracpoint

---

Same here, I never saw it under any version of the driver in both XP and Win7 so I assume it simply is not a feature of the x100e TrackPoint.

[topmahof Community Moderator]

http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-74737

scroll down and look under mouse. it says it has it. that's what i was going by.

[topmahof Community Moderator]

i just saw that you are using w7 64b.  i doubt if it will work on 64b.  that page is for 32b.