Problem: x300 BIOS (v1.04 and v1.05) VT Enabled does not work

[bits]

I'm unable to get VT to work by setting the BIOS VT setting to enabled.  I've run utilities that indicate that VT is locked / disabled regardless of the setting in the BIOS.  Does anyone else experience this?   Try using GRC's securable utility for identifying if VT is locked, not present or enabled...  http://www.grc.com/securable.htm

[bits]

BTW: This is an important feature for me!  Lenovo, please look into this...

Also, Microsoft Virtual PC 2007 SP1 reports hardware virtualization not present when BIOS setting for VT is enabled.

Moderator Note; please update your profile with your correct country location as per the forum rules. Products, options and services vary from market to market. Knowing your location helps us help you

Message Edited by andyP on 07-08-2008 09:16 AM

[bits]

Now that you know my market, will you respond?

[bits · Accepted solution]

It's working now, for unknown reasons.  Here are the steps I went through for those that are interested:

1. Installed 1.5 BIOS

<tested here with no luck>

2. Added Lenovo System Update to make sure that all software was current and installed

Is now listed as Enabled by VPC 2007.

[JaneL Community SuperMod]

Welcome to the forum, and thanks for coming back to share your solution!

Sorry no one was able to offer assistance sooner.  Sometimes it takes a day or so for another forum member who knows the answer to see a message and respond.