cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
IT-Helper
Paper Tape
Posts: 1
Registered: ‎11-18-2018
Location: DE
Views: 153
Message 1 of 2

BladeCenter S - SAS RAID Module continuous restart of Ctlr1

Hello everybody,

 

System:

BladeCenter S - 88861TG

2x SAS RAID Contr. - 44X3352

 

To connect new HDD´s (Lenovo-Brand) we must update the SAS RAID Contr.

Ctlr-0 looks fine, no problems, new firmware!

Ctlr-1 starts automaticly, but in the end...

 

Msg 202 Waiting for Ctlr 1 CLI to be available.
Msg 203 DSM firmware update has started.
Msg 204 Waiting for Ctlr 1 DSM fw update.
Msg 205 Waiting for Ctlr 1 DSM fw update.
Msg 206 Ctlr 1 DSM fw update finished.

ERROR: Firmware upgrade Ctlr 1 FAILED.

MSG: ./SbInst.py failed in function updateRcFwConcurrent, rc = 4.

 

After that message, Ctlr-1 restarts permanently.

-Starting

-Service

-NotAvailable

-Service

-Failed

-Starting

.......

 

If the Controller ist in Service-Mode, i type "shutdown -ctlr 1 -state servicemode". But the restart continues.

Power Off an Power On by the AMM, nothing!

Restart and Full Diagnostics by the AMM, nothing!

 

What can i do??

 

Firmware to upgrade: 2.3.4.035

 

Thanks and greetings!

Highlighted
Lenovo Employee tishigami
Lenovo Employee
Posts: 58
Registered: ‎04-23-2015
Location: JP
Views: 79
Message 2 of 2

Re: BladeCenter S - SAS RAID Module continuous restart of Ctlr1

Can you configure only controller-1( remove ctrl-0 and HDD) ? Then confirm ctrl-1 status.

Holiday Deals
HAPPENING NOW!

Get the best deals on PCs and tech now during the Holiday Sale
Shop the sale