Motorola Community

Older Devices ArchiveBusiness applications / VPN / document management
All Forum Topics
Options

170 Posts

05-10-2009

Canada

40 Signins

237 Page Views

  • Posts: 170
  • Registered: ‎05-10-2009
  • Location: Canada
  • Views: 237
  • Message 1 of 8

IPsec VPN in Droid 2 Global

2010-12-07, 3:21 AM

I am trying to configure VPN with our Cisco ASA with my new Droid 2 Global. I was refering to the following page: https://motorola-global-en-usa.custhelp.com/app/answers/detail/a_id/59152/~/droid---vpn-(virtual-private-network)

Quote
If the GW configuration is different, new templates can be created based on these four by modifying the algorithms and/or DH groups as explained in the documentation.

My D2G lists only AES templates, I don't see any 3DES as mentioned in the above page. It says templates can be defined as per documentation. How can I configure new templates? Where I can find the fore mentioned documentation?

Reply
Options

170 Posts

05-10-2009

Canada

40 Signins

237 Page Views

  • Posts: 170
  • Registered: ‎05-10-2009
  • Location: Canada
  • Views: 237
  • Message 2 of 8

Re: IPsec VPN in Droid 2 Global

2010-12-10, 18:46 PM

Thanks to a fellow forum member here I got the documentation link: https://motorola-enterprise.custhelp.com/ci/fattach/get/252657/1291299291/redirect/1

Now it is time to see if we can mainstream the configuration templates to make it easy to deploy

Reply
Options

170 Posts

05-10-2009

Canada

40 Signins

237 Page Views

  • Posts: 170
  • Registered: ‎05-10-2009
  • Location: Canada
  • Views: 237
  • Message 3 of 8

Re: IPsec VPN in Droid 2 Global

2010-12-10, 18:47 PM

Link to the documentation now found

Reply
Options

46 Posts

07-20-2010

United States

0 Signins

0 Page Views

  • Posts: 46
  • Registered: ‎07-20-2010
  • Location: United States
  • Views: 0
  • Message 4 of 8

Re: IPsec VPN in Droid 2 Global

2011-06-07, 23:37 PM

Has anyone sucessfully connected to a Cisco using group authentication? If you have would you please upload your template so I could learn how to connect to ours.

Reply
Options

Re: IPsec VPN in Droid 2 Global

2011-06-08, 15:26 PM

Keith,

The Group ID is called "ID" in the phone GUI and "key-identifier" in the configuration file. It is part of the ready configuration (it is chosen by the user instead of FQDN etc.), it is NOT part of the template.

Note - do not put pre shared key and/or username/password in template file.

Here is a configuration that uses key-identifier that was created using the preloaded template
PSK v1 (AES, xauth, aggressive):

version 1.0;

connection psk-v1-aes-sha1-ag-g2-xauth {
gateway-address 192.168.100.1;
internal-subnet 192.168.1.0/24;
pre-shared-key  {
   type string;
   value XXXXXXXXXXXXXXXX;
}
own-identity  {
   type key-identifier;
   value XXXXX;
}
username demouser1;
password XXXXXXXXXXX;
       host-authentication pre-shared;
       user-authentication;

       ike-parameters {
               version 1;
               aggressive-mode;
               encryption aes-cbc-128;
               integrity hmac-sha1-96;
               group modp-1024;
               life 86400;
       }
       ipsec-parameters {
               encryption aes-cbc-128;
               integrity hmac-sha1-96;
               anti-replay;
               life {
                       type seconds;
                       value 28800;
               }
       }
}

keithfaber wrote:

Has anyone sucessfully connected to a Cisco using group authentication? If you have would you please upload your template so I could learn how to connect to ours.

Reply
Options

46 Posts

07-20-2010

United States

0 Signins

0 Page Views

  • Posts: 46
  • Registered: ‎07-20-2010
  • Location: United States
  • Views: 0
  • Message 6 of 8

Re: IPsec VPN in Droid 2 Global

2011-07-06, 9:45 AM

What do you name the template so the phone can find it?

Reply
Options

Re: IPsec VPN in Droid 2 Global

2011-07-06, 21:35 PM

You can find in the guide that Leobg mentioned in previous post.

https://motorola-enterprise.custhelp.com/ci/fattach/get/252657/1291299291/redire ct/1

on page 6: Android connection templates

It is also possible to extend the set of available

templates by side-loading customized templates to the

following directory on SD card:

/sdcard/vpn/templates/

The template package filename must match the

following regular expression pattern:

[a-fA-F0-9]{8}-[a-fA-F0-9]{4}-[a-fA-F0-9]{4}-[a-fA-F0-9]{4}-[

a-fA-F0-9]{12}.txt

or in plain words:

"8 hex digits"-"4 hex digits"-"4 hex digits"-"4 hex

digits"-"12 hex digits".txt

for example: 6F38BF66-95AE-35E7-889E-0B55102901E7.TXT

Reply
Options

46 Posts

07-20-2010

United States

0 Signins

0 Page Views

  • Posts: 46
  • Registered: ‎07-20-2010
  • Location: United States
  • Views: 0
  • Message 8 of 8

Re: IPsec VPN in Droid 2 Global

2011-07-09, 20:11 PM

OK I finally got the phone to see the template. However it states that it is invalid.

The file my be corrupted by posting on the forum. Please send me template file to keithfaber@gmail.com.

This should not be this difficult. I wish there was a solution that works like the Cisco AnyConnect client on my PC. I can get this to go in 30 seconds. I have hours invested in this client & still no connection.

Thanks a bunch for your help. I would ask our IT guys to do this but they are useless and are more interested in grilling me about why I would want VPN on my phone.

Reply
Forum Home

Community Guidelines

Please review our Guidelines before posting.

Learn More

Check out current deals!

Go Shop
X

Save

X

Delete