02-22-2018 06:19 AM
I can only comment that the flap design sucks. For sure is that I will not purposely or intentionally damage it. The normal type of RJ45 port which I never have any problem on computer, laptop, LAN point etc etc....Let close this case. Thanks for the GREAT support from LENOVO.
02-22-2018 08:04 AM
DarySeah, since you are having an issue with the laptop's ethernet port, have you considered using a USB 3 to Ethernet Adapter? It might a low cost solution to your problem. Here is one example of what is available in the U.S.. I am sure there are similar offerings in your country.
09-24-2018 07:55 AM - last edited on 09-24-2018 10:46 AM by Andy_Lenovo
I don't expect to be on this forum for long because no one likes to hear the truth.
Wow, what a piece of cheap garbage; ironically & coincidentally, I’ve experienced RJ45 physical port problems when I just begun to use my Lenovo V330-15IKB today!
The dates of this thread begin to show a common denominator for many reasons.
Lenovo is even worse than the Compaq rubbish I bought in 1999 (we know what happened to them).
"You are as strong as your weakest link"; well, no exceptions here with the same flimsy quality RJ45 port that some engineer(s?) decided it would be a great idea to use with paper thin contacts and a nonsensical spring loaded half-door (impediment?) specifically designed to make the simple task of connecting a RJ45 cable a pain in everyone’s backside.
Clearly, the geometry and resultant real estate would have accommodated a proven and reliable fully-open RJ45 port from a design perspective.
I have zero tolerance for problems introduced to sound, reliable and proven features such as ruining basic mechanics of RJ45 port because some designers decided to try and be clever!
It's hard to accept that any testing or design review was undertaken in this regard.
All it took me was to put the cable in and out a few times and 3 pins are mashed and broken off.
LAPTOP USELESS and Lenovo are now worthy of being consigned to the Mt Everest of business failures!
Any retard could have designed something better than this.
I'll be seeking to get my money back!
With quality this bad, I can NEVER buy Lenovo again.
I can't imagine any other reason how this occurred other than some PC engineer designers and companies justifying their jobs by implementing such rubbish to create MRO work and increase volume turnover.
I hope this post is found in web searches as a warning to others.
Run away from Lenovo like the wind!
Admin note; post edited in accordance with the Community Guidelines.
09-24-2018 11:05 AM
Hello and welcome to the Community,
I'm sorry that you consider the design of the ethernet port to be sub-par your expectations; I'll certainly pass your comments along to the business unit.
As you can see I made some minor edits to your post. You can criticize Lenovo all you like but please refrain from language which could be considered insulting to persons known or unknown and your post will remain.
English Community Leader
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star below their post awarding them Kudos
Please don't ask me questions by Personal Message; questions belong in the forums.
09-24-2018 06:21 PM
This will be my last post.
How about expectations in par with long proven functionality from all users?
Clearly there is a trend emerging and one I don't see going away.
I find words "Knucklehead" & "Boofhead" aimed at the designers responsible justified with equivalent vitriol as my further comment "Any retard could have designed something better than this".
They clearly let their other colleagues down on a product which was sound in all other aspects for the low price.
Nevertheless, I thank you for your feedback and consolidating my post.
I concur with DarySeah findings.
Having a flap which expands down to create a full RJ socket makes cable insertion VERY difficult; heavily de-rating overall product quality.
Minor lateral flap movement makes the socket flimsy.
VERY minor wiggling necessary to remove a cable from this bad socket, combined with the poor quality fragile RJ45 internal electrical contacts, the end result was inevitable.
Lenovo could have implemented proper SOLID RJ45 sockets with real cylindrical wire ($5 for 10 - 20 pieces on eBay) and factored into their design.
Board real estate is a little tight from my inspection (I had to retrieve the 3 small fragile strips broken off), however for $50 to $100 in manufacture costs, a small price to pay indeed for something reliable.
I would encourage you to try replicating yourself.
Obviously Lenovo performed no PROPER testing.
Thank you all for reading!