English Community

Datacenter StorageLenovo Iomega Networking Storage
All Forum Topics
Options

3 Posts

06-27-2019

United Arab Emirates

2 Signins

41 Page Views

  • Posts: 3
  • Registered: ‎06-27-2019
  • Location: United Arab Emirates
  • Views: 41
  • Message 1 of 7

Battery Icon and Network Icon Displayed on ix4-200d

2019-06-27, 11:44 AM

Dear Support,

 

My iomega ix4-200d is in booting loop and sometimes shows Batery icon and Network icon on display. I have my datas in it.

Now cant access to network shares and can't even reach the network interface IP address. I don't know what happened.

 

Please help me regain the access and my data. I trust there must be a way in worst case scenarios like this.

 

Regards,

 

Reply
Options

4 Posts

11-03-2019

United States of America

3 Signins

60 Page Views

  • Posts: 4
  • Registered: ‎11-03-2019
  • Location: United States of America
  • Views: 60
  • Message 2 of 7

Re: Battery Icon and Network Icon Displayed on ix4-200d

2019-11-03, 19:27 PM

Exact same thing just started with mine.  Battery and Network sign appears then reboots.  Tried following jtcasas post for correcting the boot loop but didnt resolve my problemm  My hardware is out of date and full of family videos....  Was hoping buying a NAS i would secure everything.

 

"Large Battery Icon and Network Icon Displayed on ix4-300d  jtcases 10-05-2013"

 

Reply
Options

586 Posts

08-14-2018

United States of America

568 Signins

10334 Page Views

  • Posts: 586
  • Registered: ‎08-14-2018
  • Location: United States of America
  • Views: 10334
  • Message 3 of 7

Re: Battery Icon and Network Icon Displayed on ix4-200d

2019-11-04, 16:58 PM

Hello it looks like you posted mutiple times on the thread. Could you give us some details on how your unit is failing?  How did he unit get into this state?

Reply
Options

4 Posts

11-03-2019

United States of America

3 Signins

60 Page Views

  • Posts: 4
  • Registered: ‎11-03-2019
  • Location: United States of America
  • Views: 60
  • Message 4 of 7

Re: Battery Icon and Network Icon Displayed on ix4-200d

2019-11-04, 21:03 PM

Hello, the nas just started doing this on every boot and eventually reboots on its own so it's stuck in a boot loop.  As soon as 25% is hit on the loader the battery and network symbol appear.  I can't access the admin portal and my router never sees the device.

Reply
Options

586 Posts

08-14-2018

United States of America

568 Signins

10334 Page Views

  • Posts: 586
  • Registered: ‎08-14-2018
  • Location: United States of America
  • Views: 10334
  • Message 5 of 7

Re: Battery Icon and Network Icon Displayed on ix4-200d

2019-11-05, 15:42 PM

Hello can you please verify that you have taken the following steps?

 

Can you please also let us know what version of firmware is on the unit? 

____________________

 

If the device is not responding, proceed with the following instructions:

 

Power down the device and reseat all the drives in the device. Power the device back on.

 

If this doesn’t allow unit to boot, continue with below process.

   1. Turn off the device and pull out all the drives.

   2. Place any other drive 2, 3 or 4 in the first slot and boot up the device.

   3. Wait for sometime as the boot-up process can be slow.

             a. If it doesn’t boot, try another disk in slot 1.

   4. If it boots up correctly, insert another disk in slot 2.

            - Check UI for disk detection.
            a. If second disk is detected, turn it off, place disk 3 and 4 in unit and boot up.
            b. If it doesn’t boot-up correctly, remove 3 or 4 and retry. You may need to try to determine if 3 or 4 is bad in this case.

   5. Recreate the volume if it doesn’t start regenerating automatically

Reply
Options

4 Posts

11-03-2019

United States of America

3 Signins

60 Page Views

  • Posts: 4
  • Registered: ‎11-03-2019
  • Location: United States of America
  • Views: 60
  • Message 6 of 7

Re: Battery Icon and Network Icon Displayed on ix4-200d

2019-11-05, 19:06 PM

Hello, I have tried these steps 1-3 with different drives and still cannot get the nas to boot correctly, same boot loop with the same symbols.  I was running on firmware updated in 2018, but since I cant login to see I do not know the exact version.  Thanks

Reply
Options

586 Posts

08-14-2018

United States of America

568 Signins

10334 Page Views

  • Posts: 586
  • Registered: ‎08-14-2018
  • Location: United States of America
  • Views: 10334
  • Message 7 of 7

Re: Battery Icon and Network Icon Displayed on ix4-200d

2019-11-05, 21:22 PM

If this is a firwware issue and the device is not longer accessable via any method you may need to attempt to run the imager tool. 

 

Unfortunatley we can't give that out over the fourms.  Can you please try and open an electronic ticket with support?

 

http://download.lenovo.com/lenovoemc/eu/en/app/ask/index.html

 

This link should work for you to request access to the  imager.  

 

Directions on how to use the tool will be supplied with it. 

 

Before you run the tool..........

 

Do you have a backup of the data

 

It is advised if you want to retain the data that you would run the same version of firmware imager that already exits on the unit. You said the unit was updated in 2018. That being said there is no way for me to really know what version was on it due to from what I can tell the previous version of firmware berfore this year was released in 2015. 

 

If using a back level firmware doesn’t work then you can try the lastest imager. But please understand you will likely lose the data.

 

1)By running the tool the data may be completely removed.....This is why its super important to have a backup......You can try to run the tool with the drives removed first. But with this older version of hardware I am not sure that will work. 

2)We cannot guarantee that using the tool will solve the issue, it is given as best effort.

3)Most importantly….. if the imager further damages the unit or it does not resolve their issue we cannot replace unit which is out of warranty.

Reply
Forum Home

Community Guidelines

Please review our Guidelines before posting.

Learn More

Check out current deals!

Go Shop
X

Save

X

Delete

X

No, I don’t want to share ideas Yes, I agree to these terms