11-17-2011 11:58 AM
I'm using an IBM Lenovo R52 notebook and an external SVA monitor. For reasons optometrists can't figure out, the notebook's own monitor screen causes me considerable eyestrain whilst the larger external monitor screen does not.
Anyway, there's no point in the notebook's internal monitor being active: It consumes power and emits heat. I'd like to switch it off. Alas! I don't know how. I've done the Web-search thing; but although this matter (in general) is quite frequently raised elsewhere, nobody seems to know how to shut off a notebook's internal monitor.
Please help! Your advice will be greatly appreciated and I thank you. (Kindly resist the urge to pass along advice such as "Close the lid." It's a bit difficult to access the keyboard that way!) Below are some system data.
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name MRCAT-08607D7B3
System Manufacturer IBM
System Model 1847W76
System Type X86-based PC
Processor x86 Family 6 Model 13 Stepping 8 GenuineIntel ~1861 Mhz
BIOS Version/Date IBM 76ET62WW (1.22 ), 11/25/2005
SMBIOS Version 2.33
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name MRCAT-08607D7B3\Joe
Time Zone Pacific Standard Time
Total Physical Memory 512.00 MB
Available Physical Memory 29.73 MB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 1.21 GB
Page File C:\pagefile.sys
Name ATI MOBILITY RADEON X300
PNP Device ID PCI\VEN_1002&DEV_5460&SUBSYS_056E1014&REV_00\4&26
Adapter Type ATI Radeon Graphics Processor (0x5460), ATI Technologies Inc. compatible
Adapter Description ATI MOBILITY RADEON X300
Adapter RAM 64.00 MB (67,108,864 bytes)
Installed Drivers ati2dvag.dll
Driver Version 22.214.171.12483
INF File oem13.inf (ati2mtag_M22 section)
Color Planes 1
Color Table Entries 4294967296
Resolution 1024 x 768 x 60 hertz
Memory Address 0xC0000000-0xC7FFFFFF
I/O Port 0x00003000-0x00003FFF
Memory Address 0xA8100000-0xA81FFFFF
IRQ Channel IRQ 16
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\ati2mtag.sys (126.96.36.19983, 1.90 MB (1,989,120 bytes), 4/5/2007 3:27 PM)
Solved! Go to Solution.
11-17-2011 12:10 PM - edited 11-17-2011 12:15 PM
look in the BIOs you might be able to set it to external only or FN + F7
11-18-2011 11:09 AM
Thanks, GMAC-R60, for your reply. Indeed, Levovo literature insists the F7 key enables switching between external and internal monitors; and it further states the correct key combination is (as you pointed out) Fn + F7. However, when I use that key combination the only result is that I'm presented with a dialog box enabling "Caret Browsing"; and the same box appears if I use the F7 key alone,
The F7 key itself even has on its surface a depiction of two monitors! The Web pages available via Lenovo Support & downloads - ThinkPad R52 1847-CTO support (link fails to redirect properly) contain no information pertaining to this problem. Oh, well.
11-18-2011 11:27 AM - edited 11-18-2011 11:30 AM
you may not have the hot keys installed
11-20-2011 12:06 PM
Yay! Hooray! Thank you very much, GMAC-R60, for your advice. I installed those items you listed and now the Fn +F7 combination actually does what it's supposed to to! Your help in this matter is greatly appreciated. Y'all take care now, hear?