01-17-2019 03:38 PM - edited 01-17-2019 03:41 PM
I've read other posts and there isn't much in the way of detailed videos so I have a couple questions regarding removing the rear cover of the Horizon 2 (the slim model) 27" AIO.
First, I can push into the recess and get the screen to pop out enough to get something in between but I'm not sure what holds the screen to the case? Are there snaps in there that I'm releasing as I move along, separating the screen from the cover, or is there some sort of adhesive tape or what, exactly holds the screen to the case that I am undoing?
Second, there are two areas to insert a screwdriver. Do I need to use both, or just start with one and work my way around? Do I need to go all the way around the unit to release the screen or does it release after just doing the one side?
If anyone has done this, let me know and any other helpful tidbits. I'm looking to replace the HDD with a SSD.
Solved! Go to Solution.
01-17-2019 06:05 PM - edited 01-17-2019 06:06 PM
Please see HMM(Hardware maintenance manual) Start on page 22. Also see below video. Hope it helps you.
If a post answers your question, please mark it as an”Accepted Solution“!
If a post helps you, please click the star to give it a "Kudo"!
I do not work for, nor do I speak for Lenovo. I will not respond to unsolicited private messages. Questions belong in the forum so it may help other forum members as well.
T490, TP 25 Retro, X1 Yoga 3rd Gen, W510 850 EVO, A30p
Retired 385D, A20p, A21p
01-18-2019 09:02 AM
Thanks. I had looked at some Lenovo videos, but they were short and not as detailed as these.
I was successful in opening the case and have also successfully replaced the HDD with an SDD (Intel 525 500GB).