11-09-2011 09:02 AM
Hello original poster,
Did you ever get the answer you were looking for and/or get your issue resolved?
Please let us know.
Your feedback is important to the community
04-29-2012 10:01 AM
I upgraded my B575 HDD last year to an SSD. I originally tried a fresh install of windows, but due to the power hang problem and the wireless problem, I ended up reinstalling the factory settings using the Lenovo One Key Recovery DVDs I made prior to removing the HDD. (This was all done prior to this posted solution). I recently had a problem with an Ubuntu dual OS install, and attempted to reinstall windows on my SSD. Not only did the steps above not work for me, (I can't get Windows to ever make only 2 partitions) I also cannot install with my OKR discs. I get an error the the drive's partitions are incorrect to use OKR. Any ideas?
05-01-2012 09:05 AM
Just an FYI in case anyone else comes up against this. I solved the problem. I never was able to get the workaround mentioned above to work. Windows never gave me only 2 partitions, always 3. The reason the OKR recovery disks wouldn't work was because the Windows 7 DVD formatted the partitions as GPT. OKR needs MBR. I used a SATA / USB adapter to plug the SSD into my PC, ran the disk manager, and changed the partition. Then OKR worked perfectly. (I tried to format the partitions into just 2 for the Windows 7 DVD installer, but it would still erase them and reformat them into 3.)
02-03-2014 01:16 PM
I tried everything on this thread to no avail. Every attempt left me with 3 partitions and the odd symptoms of inability for Windows to shutdown/reboot or connect to the wireless device. The help others provided was very useful. They showed me I needed to get my disk partitioned with just two partitions and that the way to make that happen was to make sure the partition table was MBR vs GPT. [I'm not even sure I understand that distinction means or if I'm even describing it correctly. ]
Here's what worked for me:
01-10-2016 09:25 AM
I had this reboot/shutdown issue after upgrading to Windows 10 and was unable to fix for some reason using the steps in the previous posts. Windows 10 would just convert the mbr volume back to gpt during install. I was able to resolve using the step below:
1. Convert the volume from gpt to mbr using Windows Diskpart using Windows Install media, instructions in this link.
2. Follow the steps in this video link to create bootable primary parition and copy Windows install to mbr volume and then install.
Windows 10 now shutdown/reboots fine...