03-07-2015 04:02 AM - last edited on 02-23-2016 05:51 AM by Majestic
i have Lenovo G50-70 Laptop (59-417110) (4th Gen Intel Core i3- 2GB RAM- 1TB HDD- 15.6 Inches- DOS- 2GB Graphics).
i got driver cd with this laptop and i install it but its not working.when i check the graphics memory it shows 748mb only.
i had also installed intel graphic driver by using that only i can change my brightness.so plz help to install amd graphics driver. i cannot open amd catalyst.
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.
Solved! Go to Solution.
03-09-2015 07:19 AM
If you're running on Windows 7 64bit, can you consider the following:
1. Navugate to the Control Panel (icon views) > Display Adapters and uninstall both the Intel and AMD Display driver then reboot.
2. Install the Intel Display Driver first then reboot.
3. Install the AMD Dislpay Driver (the files will be extracted drivers to the C:\Drivers\VGA folder - overwrite if prompted and reboot if necessary)
When finished, you should now have both the Intel HD Graphics 4600 and AMD R5 M230 in the Device Manager > Display Adapters
If you get a Code 43 error on the AMD Display Device Manager, try to install the AMD R5 M230 driver directly from AMD website and observe.
If you have Windows 8.1, download the Intel and AMD Display driver from the G50-70 drivers page and install them respectively.
08-31-2015 12:48 AM
Hi, I am having same issue with my Lenovo G50-70 , Windows8.1, with AMD R5 M230 where on displaying some images, I get the message "intel hd display driver stopped responding and has recovered".
I went the Display Adapters from control panel, and pressed to Update the Intel HD driver and AMD driver: but both are up-to-date: even I matched the software version number with the latest on Lenovo website http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g50-70-noteboo...
What is the reason for this issue, and how can I come out of it? I have started seeing this issue recently: this week, though it worked fine all along. Is there a way to reset these adapters - could there be memory leak etc?