06-23-2015 10:48 PM
I'm using laptop Lenovo G460.
This morning I just installed windows 8.1 on my laptop and everythings seems ok.
Then after finished installed Office 2013 and VLC player, I shut down my laptop normally.
Then, when I tried to turn it on, after screen Lenovo it get message that
PXE-E61: media test failure, check cable
PXE-M0F: exiting PXE Rom
After read few forums, it's because the boot from network enabled and must be disabled form bios.
But, I can't access my bios as ussual, in Lenovo screen there are no command like press F12 to boot menu, or DEL to enter setup.
Any suggestion and how to fix it? Thank you for your help.
06-24-2015 08:35 AM
Welcome to the Forums.
After powering up the machine, can you continuously tap F2 to access the BIOS.
IWhen you get in, check these settings:
1. Ensure that the HDD is detected
2. Disable the PXE Boot to LAN
3. Ensure that the primary HDD is set as the first boot device.
When finished, hit F10 to save and exit and observe if you can now boot to the OS
06-24-2015 08:32 PM
I do that isntruction, but I still can't access the bios to disablethe PXE boot to LAN.
I'm sure that HDD can detected.
I have try another HDD on my laptop but the problem still same.
02-20-2018 08:01 PM
I have removed the battery and still cannot get to the BIOS. I've removed the hard drive and I'm still getting the same error and cannot access the BIOS. Anyone know what else I can try?