12-10-2017 07:47 PM - edited 12-10-2017 07:50 PM
I have a problem when I press FN+anykey it randomly shows 2 different picture icon time to time. please see the picture attached what should I do to make this single.
12-11-2017 08:48 AM
Welcome to the Lenovo Community !
What Lenovo model you own?
It looks in the images that you are pressing a key combination that brings up the speaker volume and muted speaker function. I assume that you want to perform a function like that without the need to press two keys at the same time? Depending on what Lenovo model you own, there is a setting in the BIOS Setup that changes the use of the Function key from pressing FN + F key to just pressing the F key. Please check your BIOS Setup for that setting.
12-16-2017 11:03 AM
Hi, Sorry for the late reply,
My Laptop is Lenovo G40. My problem is that there are 2 kinds/type of interface showing sometimes its different and the next day its different again. Im not talking about mute or volume up/down. What Im trying to say is that sometimes the icon/picture is white one next time its the orange one. I think i have 2 different version installed on my unit. look at the pic the drawing is different. The interface picture is randomly changing all the time.
12-17-2017 08:26 AM
What is your full model number? Example: G40-70
And what operating system you have installed?
Depending on the model and operating system, some Lenovo models use a application like Lenovo Utility to control On Screen Displays. I am thinking if your system is using such an application that it needs to be un-installed, reboot and then re-installed to correct any issues.
12-19-2017 08:48 AM
I don't see any Lenovo Utility available for the G40-70. Quite possible the on screen display is part of the Power Management driver for your system. I would try re-installing the appropriate driver for your operating system.