cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Geri
Punch Card
Posts: 20
Registered: ‎11-25-2008
Location: Austria
Views: 24,159
Message 1 of 5

How to install Win 7 on Lenovo V570 with Freedos

Hello

I just got a new lenove V570 with Freedos and would like to install Windows 7 professional.

When I try to install Windows 7 64 bit, I get the error: The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks?.

It is really frustrating. Does anybody have an idea how to solve this problem please?

Thank you very much for your in advance

Geri

 

Retired Moderator
Retired Moderator
Posts: 13,719
Registered: ‎12-07-2009
Location: CZ
Views: 24,146
Message 2 of 5

Re: How to install Win 7 on Lenovo V570 with Freedos

Highlighted
Geri
Punch Card
Posts: 20
Registered: ‎11-25-2008
Location: Austria
Views: 24,126
Message 3 of 5

Re: How to install Win 7 on Lenovo V570 with Freedos

Good evening together

 

@yigit, thank you for your fast response and the hints!

 

 

Now I have managed to install Windows 7 pro.

 

Attached the steps (as I can remember) that worked for me (without any warranty)

 

1.) Boot with MS Windows 7 installation CD
2.) Select country, keyboard settings etc.
3.) Accept license agreement
4.) Press proceed until the dialog with the installation volume appears (This is the place as MS Windows tells you:  The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks...
5.) Delete volumes but not the one of lenovo!
6.) Press SHIFT + F10
7.) Enter diskpart (This is the MS-Windows partition tool - diskpart.efi
8.) Enter List => Now you will see the disks. In my case Disk 0 was the one
9.) Enter SELECT Disk 0
10.) Enter List => Now you will see the partitions
11.) Enter Delete Partition x (x is the partition with the MBR)
12.) Enter create partition  (Now a dialog should appear asking you how much space you want to reserve for your partition
13.) E.g.. Enter 200 (200 GB
14.) Enter List partition (Now you should see the new Partition)
15.) enter Exit two times (Once for exiting diskpart, the other for coming back to the installation screen
16.) Proceed with you windows installation by selecting the new partition for your system


Selecting the right partition it was not necessary to delete the pre-installed data from lenovo!

I think this procedure should also work with a raw disk.


As Yigit outlined, please check also this link. http://support.microsoft.com/kb/297800

I tried it but I am not sure if it is necessary on lenovo systemsSmiley Happy


I hope that helps,
best regards

Geri

drazenj
Paper Tape
Posts: 4
Registered: ‎01-03-2013
Location: Bosnia
Views: 19,601
Message 4 of 5

Re: How to install Win 7 on Lenovo V570 with Freedos

Smiley Happy Thanks Geri for the post - solved !!

But I do exactly wrong ,what You are wrote, I delete the Lenovo volume-partition ,on my G770 !!!

Now I have the problem to install Win 7 from the bootable USB or DVD ! System ask me for  some drivers !?

If YOU can upload your genuine LENOVO VOLUME some where on the NET ,and post me WHERE, I would be apreciate and MUCH THANKS to YOU !! 

I think that this VOLUME is not greater then 30 MB cca !?? so it would'nt be a BIG DEAL !?? for you !??

THANKS for your job !!

 

AndreasFreemind
What's DOS?
Posts: 3
Registered: ‎06-25-2014
Location: greece
Views: 9,080
Message 5 of 5

Re: How to install Win 7 on Lenovo V570 with Freedos

Check out current deals!


Shop current deals

Top Kudoed Authors