05-31-2009 12:26 PM
Where can I find the Lenovo 3000 G530 video instruction. I want to upgrade the RAM, and cannot get the cover off.
05-31-2009 01:28 PM
Lenovo may not have the video's on your model..
http://consumersupport.lenovo.com/en/UserGuide/Guide_list.aspx?CategoryID=10 (has both setup guide & poster)
The largest door has the CPU & Ram behind it. remove the battery before removing any doors or covers. (see - setup poster)
Remove the two screws, there is a lifting cavity between the two screws, gently pry up the cover with smal lscrewdriver.
Do not remove the CPU. Sorry I can't help you more.
06-06-2009 10:50 PM
What about Lenovo 3000 N 500 model.. Please let me know, where I can get help. I posted a new mesage with details before writing a reply to this message. Any help would be appreciated.
10-21-2009 12:39 PM
Hi... It would be great if the service videos could be posted for Lenovo 3000 G430 series (4152-27Q). Infact its a very sorry state of affairs that not even a single manual is available on the lenovo site for parts reference for this category/series.
10-21-2009 01:43 PM
Try Goggling for what you need. I needed to retrieve a screw that popped into interior of my 8.1 Acer netbook, I goggled how to add more ram. There were many ideas & U-Tube videos on how to do the job.
The job was 20 min in & out!
You might have to rephrase your question to get the answer needed. You will be surprised at the returns on your need.
12-19-2009 11:24 AM
It appears the only video for the 3000 desktops is for the J100.
C300 owners would appreciate as much information as possible.
Hint, create an All In One or C300 video.
06-03-2010 08:22 AM
I'd like to disable the keyboard of my laptop. My laptop is 3000 G series 410. Its two years old. I couldn't do it by uninstalling device manager. I need to remove the keyboard connection physically. Could you please help me to do it? Please give me the video link for the same.
08-15-2010 08:02 AM