04-07-2017 03:58 PM
After changed settings in BIOS, i can't boot to Windows or enter the BIOS via FN+F12. Even the Notebook restarts permanently after power off, and automaticly turns off and on.
What have i done? What can i do? Can anybody help?
Solved! Go to Solution.
04-10-2017 02:43 AM
Thanks for using the Lenovo forums.
Try to set the BIOS back to defaults settings, see if this can make a difference.
Let us know how you get on.
Did someone help you today? Thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
07-29-2017 01:44 PM
I have exactly the same problem as Lu3. I also cannot enter my BIOS anymore after I have changed my BIOS settings. My V510-15IKB notebook is brand new, I received it 2 days ago. The notebook has been solely delivered with FreeDOS. The first time I powered the notebook up, FreeDOS booted normally. But since I changed my BIOS settings the screen just fires up an error message, which is shown in the picture attached to this message, and then turns permanently black. Fn+F2 doesn't bring me to the BIOS anymore, instead the screen is again just black. Also, as in the case of Lu3, when I now try to shutdown the computer by pressing the power button for a few seconds, the computer is just restarting, no matter how long I press the power button .
Your suggestion, Krakken, is of course not working, because to change the BIOS settings it is necessary to have access to it. I think the critical change which led to this error, was when I changed my hard drive settings from "ahci" to "raid". What can I do now, to fix this issue??
08-01-2017 03:09 AM - edited 08-01-2017 03:16 AM
Same problem after change bios setting.
Try shutdown laptop, then press Novo key (right side of laptop - see Manual).