11-13-2018 11:10 AM
Help! No matter what monitor (HDMI or VGA) I connect to this wonderful desktop, I get a 'no signal' reading.
What is going on? Is it because the desktop is a Ryzen and not an Intel?
Solved! Go to Solution.
11-13-2018 06:30 PM
Welcome to the Community,
Is this the first time your going to set up an external monitor to your desktop, or it works before and suddenly experiencing issues? Is the external monitor connected to the upper vertical HDMI / VGA port or the below horizontal HDMI / VGA port? You may also share us the machine type model for us to further check the specification.
11-14-2018 09:37 AM
08-11-2019 05:59 AM
I've tried every combination to get two monitors to work, except for the display port because I don't have a cable for that.
I've tried the HDMI on the top, vertical port with a vga cable and neither display is detected. I've even tried adjusting the display in the BIOS to force it with no luck.
I've tried the HDMI on the lower, horizontal ports with the VGA, and only the HDMI works.
Do I have a bad board on the top, vertical ports?
08-11-2019 06:58 AM
If there are lower horizontal video ports, they are on a Nvidia or AMD graphics card, which provides higher performance than does the integrated graphics, and therefore the integrated graphics and the upper vertical ports are disabled.