02-15-2017 08:53 AM
I've instaled Windows 7 X64 and everything works fine except the camera. I tryed to install recomended drivers for this moment but it showed me the message "No appropriate driver has been instaled for your system". After that I tried Lenovo easy cam driver but nothing happend.
Next step was going into the Bios and enable it the camera from there but I couldn't find the camera there in my configuration setings.
I have readed this forum to find solution for my problem but nothing works for me.
There is any other way to solve my problem?
02-15-2017 10:30 AM
Have you already installed the chipset drivers and the usb drivers for windows 7. The camera is internally connected via usb. Also check if the system detects any unknown device in device manager, if there is any try manually installing that device.
Hope this helps.
02-16-2017 11:33 PM
The No appropriate driver to be installed means that you most likely installing a driver for a different camera device (for eg. You're installing an Intel Wi-Fi driver for a Broadcom card).
To find out the correct diver for your device, can you try to follow this guide on how to identify the camera manufacturer (or post the hardware ID here).
Update us how it goes.
Tap that kudos button if I helped
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
02-27-2017 01:26 PM
I tried everything but noting helps. I couldn't find the camera in the Bios as hardware.
At the end I brought it to the service where they found that the camera was faulty.