05-02-2019 10:48 PM - edited 05-02-2019 10:56 PM
My device is Lenovo Ideapad 320-15IKB Type 81BG 81BG0096PH
I bought a RAM manufactured by G.Skill. It's one of their Ripjaws lineup of RAM. It has a frequency of 2400mhz CL 16. Upon checking the RAM via the powershell using my laptop, the RAM that is currently soldered on my laptop is manufactured by Samsung. I have no idea about the latency of the RAM that is currently soldered in my laptop. I can't stop wondering if the RAM that I bought will work in my device due to difference of latencies between the two. Knowing that the RAM that I bought is manufactured by another company and it has a different frequency compared to the RAM that is being soldered in my device. Am I going to face a lot of issues?
05-08-2019 03:03 AM
Hi there, Kimson!
Welcome to the Lenovo forum discussion!
As we were checking here, the Lenovo IdeaPad 320-15IKB can hold up to 16GB / 2133MHz DDR4, dual-channel capable and it has one available free RAM slot. You can check the complete specs here https://psref.lenovo.com/syspool/Sys/PDF/Lenovo%20Laptops/ideapad%20320%20(15_),%20320%20(15_%20Touc... and from the hardware maintenance manual https://download.lenovo.com/consumer/mobiles_pub/ideapad320-15isk_320x-15isk_320-15ikb_320x-15ikb_32... (see page 27).