11-06-2017 06:54 AM - edited 11-06-2017 06:55 AM
I have a problem with conservation mode of my 320-15ABR Laptop (Ideapad) (Win 10).
In practice, I can no longer turn off the conservation mode by Lenovo Companion. When I connect the charger, the battery is always connected but not charging, even if the conservation mode is turned off. I tried downloading "power and management" drivers but the situation remained the same. I also installed energy management once and it worked but then when I tried to install it again it opens a command prompt window for a few seconds without running the same commands. How can I fix it?
I'm waiting for your answer.
12-15-2017 01:26 AM
Thanks for using the Lenovo forums.
Have you tried another charger? Perhaps there will be an issue with the battery itself.
Try a static discharge for this, it may help to resolve the issue or at least get rid of any built up static on the motherboard.
(If the battery is internal, please just skip the remove/replace battery steps.)
1. Turn the unit off
2. Remove the battery and the Mains adapter
3. Press and hold the front power button for 30 seconds
4. Replace the battery and the Mains adapter
5. Turn the unit on as normal
Hope this helps, let us know how you get on.
Did someone help you today? Thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.