EFI-network-for-IPv4-boot-fail-on-idea-pad - English Community

Go to page

11
Posts: 2
Registered: 2014-02-12 18:41:13
Location: Plymouth
Views: 6

2014-02-12 18:49:53

Re: EFI network 0 for IPv4 boot fail on idea pad

Hey,

My laptop decided today to have the error of EFI Network 0 for IPv4 and IPv6 both failing and I've tried doing the f2 thing but nothing's coming up :(

Got the laptop in December and I don't know what else to do or how to do it, can someone help as I need the laptop desperately for my university computer course

Thank you.

Solution

Solid_CruverRetired Support Specialist

7351
Posts: 4469
Registered: 2013-04-22 15:08:59
Location: Philippines
Views: 254594

2014-02-12 19:07:19

Re: EFI network 0 for IPv4 boot fail on idea pad

hi JessMoggie93,

Welcome to Lenovo Community Forums!

this may be cause by a wrong Boot Order or the HDD technically cannot be detected by your computer cuasing it to boot to other media.

Can you first try doing a Power Drain.

Remove the AC Adapter from your Computer if the battery can be removed, Remove it as well.

Hold the Power Button down for 15 sec.

Reconnect Everything, Turn on the Computer and start hitting F2 or Fn + F2

This will boot the system to BIOS

Check Under the Information TAB if the HDD / Hard disk is being detected.

If you cannot Find the HDD in there, you can check You system's maintenance Manual on how to Re-seat the HDD connection.

You can conatct lenovo Support for Assistance on Hardware.

Hope this helps

Cheers!

Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Follow @LenovoForums on Twitter!

Was this solution helpful?

Your feedback helps us improve!

Replies

Solution

Solid_CruverRetired Support Specialist

7351
Posts: 4469
Registered: 2013-04-22 15:08:59
Location: Philippines
Views: 254594

Message2of62

2014-02-12 19:07:19

Re: EFI network 0 for IPv4 boot fail on idea pad

hi JessMoggie93,

Welcome to Lenovo Community Forums!

this may be cause by a wrong Boot Order or the HDD technically cannot be detected by your computer cuasing it to boot to other media.

Can you first try doing a Power Drain.

Remove the AC Adapter from your Computer if the battery can be removed, Remove it as well.

Hold the Power Button down for 15 sec.

Reconnect Everything, Turn on the Computer and start hitting F2 or Fn + F2

This will boot the system to BIOS

Check Under the Information TAB if the HDD / Hard disk is being detected.

If you cannot Find the HDD in there, you can check You system's maintenance Manual on how to Re-seat the HDD connection.

You can conatct lenovo Support for Assistance on Hardware.

Hope this helps

Cheers!

Was this solution helpful?

Your feedback helps us improve!

Bugzy23prWhat's DOS?

00
Posts: 1
Registered: 2014-04-22 03:26:28
Location:
Views: 5

Message3of62

2014-04-22 03:29:18

Re: EFI network 0 for IPv4 boot fail on idea pad

omg thank you so much for this, I moved up d HD boot and now I have no problems when it turns on, it simply just turns on normally. After so many weeks with this problem, thank you so much.

figanjoPaper Tape

00
Posts: 2
Registered: 2014-06-06 07:23:59
Location: nairobi
Views: 26

Message4of62

2014-06-06 07:32:06

Re: EFI network 0 for IPv4 boot fail on idea pad

i've got in the BIOS and under hard disk it says [Not Detected]

what could be the problem

youngdeezieWhat's DOS?

10
Posts: 1
Registered: 2014-11-10 02:34:59
Location: Kentucky
Views: 10

Message5of62

2014-11-10 02:38:59

Re: EFI network 0 for IPv4 boot fail on idea pad

Figanjo, This is somehow a good thing. Power off your computer and then open it up. Remove the hard drive and plug it back in. It should work then. If that does not work, you may have a problem with the connection between your hard drive and the rest of your computer. Make sure the cable is secure, and if not, I don't know what to tell you but try to get your hard drive connected. Good luck!

youquanliuPaper Tape

10
Posts: 9
Registered: 2014-11-07 18:23:51
Location:
Views: 44

Message6of62

2014-12-08 21:52:30

Re: EFI network 0 for IPv4 boot fail on idea pad

I got the same problem, but my laptop is lenevo Y50 with Hybrid 1TB 5400 RPM+8GB SSHD. How can recover it?

ShortonWhat's DOS?

00
Posts: 1
Registered: 2014-12-12 05:43:06
Location: Arizona
Views: 9

Message7of62

2014-12-12 05:50:09

Re: EFI network 0 for IPv4 boot fail on idea pad

I had the same issue and after reading all of the comments I unplugged my hdd and reattached it and everything seemed to work fine butttttt I have never opened my laptop since I got it and strangely enough there were no screws holding down my hdd like there are suppose to me. Just empty screw holes. Weird.

SheiqPaper Tape

00
Posts: 7
Registered: 2014-12-22 18:12:13
Location:
Views: 44

Message8of62

2014-12-22 18:25:58

Lenovo Y50 EFI network 0 for IPv4 boot fail.

Hey,

My laptop decided today to have the error of EFI Network 0 for IPv4 and IPv6 both failing and I've tried doing the f2 thing but nothing's coming up .

It recognizes my hard disk and everything but i just can't solve this issue.

LenBlazerBit Torrent

2731
Posts: 5402
Registered: 2013-05-09 22:51:32
Location: United States of America
Views: 19373

Message9of62

2014-12-22 20:25:07

Re: Lenovo Y50 EFI network 0 for IPv4 boot fail.

wrote:
Hey,

My laptop decided today to have the error of EFI Network 0 for IPv4 and IPv6 both failing and I've tried doing the f2 thing but nothing's coming up .
It recognizes my hard disk and everything but i just can't solve this issue.

Is your intention to boot to a network?

SheiqPaper Tape

00
Posts: 7
Registered: 2014-12-22 18:12:13
Location:
Views: 44

Message10of62

2014-12-22 21:01:28

Re: Lenovo Y50 EFI network 0 for IPv4 boot fail.

Whenever i turn on my computer, a black screen shows up with a message "checking media"
then it would fail then a blue screen would say
"Default Boot Device missing or Boot Failed
Insert Recovery Media and Hit any key
Then Select Boot Manager to choose a new Boot device or to Boot Recovery Media"
then it would take me to Boot Managaer where it would give me only two options
"EFI Network 0 for IPv4 (B8-88E3-8F-4D-B3)
EFI Network 0 for IPv6 (B8-88E3-8F-4D-B3)"
none of them works. Please help.