07-09-2014 01:11 PM - edited 07-09-2014 01:19 PM
Thanks for Posting!
First go inside BIOs by tapping F2 while turning on the computer.
Then go to the Exit TAB and make sure that the OS Optimized and OS Optimization are selected to Other OS or Disabled.
Then Go to Boot or startup tab Make sure that secure BOOT is disabled
and Boot mode and Boot Priority is set to Legacy.
Now hit F10 to Save and Exit
Insert the CD and Turn the system OFF
Now when the computer starts up start hitting F12 (while the system is turning ON)
You should have a boot selection select BOOT menu or Select the CD / DVD
This should make the CD's load the Installation.
10-27-2015 09:19 AM
I have tried whit f2, f1, f12, esc and delete the laptop keeps booting to Windows 10. While I press a key the screen stays black when I stop pressing the key he boots to Windows. PLZ advice cause I want to install SSD so I need tot boot from USB or dvd-drive
11-27-2015 10:39 AM
I have the same problem with the z5170 i just bought. I did what you wrote step by step but it still goes to the same black screen where i'm asked to enter date time and drive C command. Is there any other way to solve this?