cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
jtan199420
Blue Screen Again
Posts: 2
Registered: ‎07-30-2017
Location: PH
Views: 157
Message 1 of 2

Lenovo Z50 Numkey "0" Failure after SSD upgrade

After my upgrade in Lenovo Z50 from HDD to SSD, my numkey suddenly malfunction. Everytime I type the number, it will always scroll down. I don't know why.

Sr Support Specialist
Posts: 8,354
Registered: ‎11-30-2015
Location: PH
Views: 124
Message 2 of 2

Re: Lenovo Z50 Numkey "0" Failure after SSD upgrade

Hi jtan199420,

 

Welcome to the Community Forums.

 

WWith single key issue, I do not think it has anything to do with the replacement of the drives. You can isolate it by bootng the machine in a different rescue media to check if you have the same issue. 

 

If it also fails but works ok using an external usb keyboard then most likely during the process of upgrade is that you have the key impinged. I hope the internal clips did not got damage and was only displaced. This may be the one causing it like a sticky key.

 

I hope this helps answer your query.

Update us how it goes.

 

Regards



Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Check out current deals!


Shop current deals

Top Kudoed Authors