English Community

Lenovo NotebooksLenovo P, Y and Z series Notebooks
All Forum Topics
Options

13866 Posts

12-07-2009

CZ

9005 Signins

170423 Page Views

  • Posts: 13866
  • Registered: ‎12-07-2009
  • Location: CZ
  • Views: 170423
  • Message 11 of 20

Re: Y510, Computer turns on but blank screen.

2010-12-09, 11:42 AM

you can hear the sound but you can't see the screen, not even lenovo logo at start-up?

if you hear the start-up sound, i can say your computer works but not screen.

could be loose lcd cable, lcd or graphic card issue.


http://www.krasotaiskusstva.com
Reply
Options

5 Posts

11-27-2010

Canada

21 Signins

69 Page Views

  • Posts: 5
  • Registered: ‎11-27-2010
  • Location: Canada
  • Views: 69
  • Message 12 of 20

Re: Y510, Computer turns on but blank screen.

2010-12-09, 23:21 PM
Yes I can not even see the Lenovo Logo at the start up
Reply
Options

13866 Posts

12-07-2009

CZ

9005 Signins

170423 Page Views

  • Posts: 13866
  • Registered: ‎12-07-2009
  • Location: CZ
  • Views: 170423
  • Message 13 of 20

Re: Y510, Computer turns on but blank screen.

2010-12-10, 10:42 AM

call lenovo support line cause you may need replacement, probably graphic card or lcd.


http://www.krasotaiskusstva.com
Reply
Options

17 Posts

03-24-2008

Hong Kong

153 Signins

594 Page Views

  • Posts: 17
  • Registered: ‎03-24-2008
  • Location: Hong Kong
  • Views: 594
  • Message 14 of 20

Re: Y510, Computer turns on but blank screen.

2010-12-10, 19:52 PM
i had this problem on mine,too. I found out that it was the graphic card is dead, if you have the y510 with a delicate graphic card.

Solution on my y510 is to replace the graphic card , in my case it is 8600m gt
以宇宙和大風暴的艾德布洛伊之名
Reply
Options

3 Posts

10-06-2008

Indonesia

9 Signins

46 Page Views

  • Posts: 3
  • Registered: ‎10-06-2008
  • Location: Indonesia
  • Views: 46
  • Message 15 of 20

Y510 Blank Screen

2011-08-29, 0:27 AM

Hello, my Y510 recently had this weird problem. When I I turned it on, it normally booted (I can hear the windows sound) but the screen remains blank. I have to turn it off manually (usually 2 or 3 times) before the screen finally turns on.

 

Does the problem lies with my LCD or is it my VGA that needs replacement?

 

Thanks in advance.

Reply
Options

13866 Posts

12-07-2009

CZ

9005 Signins

170423 Page Views

  • Posts: 13866
  • Registered: ‎12-07-2009
  • Location: CZ
  • Views: 170423
  • Message 16 of 20

Re: Y510 Blank Screen

2011-08-29, 12:52 PM
probably lcd, connector or graphic card issue.
contact lenovo or local support center for possible replacement.

( use vga or hdmi output to check if the issue persists. if you're able to see windows desktop on external monitor, it's probably lcd/connector )

http://www.krasotaiskusstva.com
Reply
Options

3 Posts

10-14-2013

Pretoria

5 Signins

42 Page Views

  • Posts: 3
  • Registered: ‎10-14-2013
  • Location: Pretoria
  • Views: 42
  • Message 17 of 20

Re: Y510, Computer turns on but blank screen.

2013-10-14, 6:51 AM

Hello My name is Bob  I have this blank screen problem also. Have you managed to fix yours ? 

Reply
Options

7634 Posts

11-19-2007

US

10101 Signins

400183 Page Views

  • Posts: 7634
  • Registered: ‎11-19-2007
  • Location: US
  • Views: 400183
  • Message 18 of 20

Re: Y510, Computer turns on but blank screen.

2013-10-16, 17:32 PM

Bob,

 

Welcome to the forum - it seems that a few people have developed these symptoms and the consensus  for them if they had no video at all, was that the graphic card or system board may have failed.

 

Here is some general troubleshooting:

 

If you power up the system, do you get any display on the internal LCD?      If no, then try attaching an external display and see if that works.  If that works, but the internal still does not, then it may be a hardware problem with the internal cable, the LCD, or possibly the system board and you may need service.  The Y510 is an older system, but parts should still be availble through Lenovo service.   You can find the number for support in your country here on our support site.

 


I believe you sent a PM to other members of our community and included some further details that sounded like:

"I have a Y510 and suddenly when I log on the screen goes Black with a cursor. I have tried to boot up in safe mode but it still does the same."

 

If you are able to initially get a display when you first power up, see if you can go into BIOS (usually pressing F1 or F2 as instructed on the Lenovo screen when you first power on the system).   If you have a display in BIOS, then the hardware may be OK, and perhaps your video drivers are corrupt.  While in BIOS make sure the hard disk is recognized.

 

Safemode should load the generic VGA drivers.   It may be that Windows is currupt and not loading properly.  

Perhaps you can try to find a linux or other Windows DVD and try to boot from that.  Pressing F12 at start up should bring up a boot device list, and you could select the DVD drive.

 

Best regards,

 

Mark

 

Reply
Options

3 Posts

10-14-2013

Pretoria

5 Signins

42 Page Views

  • Posts: 3
  • Registered: ‎10-14-2013
  • Location: Pretoria
  • Views: 42
  • Message 19 of 20

Re: Y510, Computer turns on but blank screen.

2013-10-16, 18:13 PM
Thanks for your advice, I will let you know if I have any sucess. Bob1945
Reply
Options

3 Posts

10-14-2013

Pretoria

5 Signins

42 Page Views

  • Posts: 3
  • Registered: ‎10-14-2013
  • Location: Pretoria
  • Views: 42
  • Message 20 of 20

Re: Y510, Computer turns on but blank screen.

2013-10-16, 19:45 PM

Hi,

 

I have the same problem.If you get it right Please would you let me know how you did it.

 

Thanks bob1945

Reply
Forum Home

Community Guidelines

Please review our Guidelines before posting.

Learn More

Check out current deals!

Go Shop
X

Save

X

Delete