Showing results for 
Search instead for 
Do you mean 
Paper Tape
Posts: 6
Registered: ‎08-31-2010
Location: Persia
Message 1 of 2 (882 Views)

Y560 onekey theater and power management doesnt work

I changed my partitions and that onekey recovery hiden partition wiped out. but after that my onekey theater key and power management key doesn't work to. how can I activate it again. I installed acronis instead of onekey recovery. is it possible to address onekey recovery key to acronis?

Community Moderator
Posts: 13,484
Registered: ‎12-07-2009
Location: Česká Republika
Message 2 of 2 (865 Views)

Re: Y560 onekey theater and power management doesnt work

[ Edited ]

download the following utility from symantec and follow the instructions...


- extract the utility and run as administrator.

- at the top, you must make sure it is your hard drive disk 1 [if you have flash drive connected it may change]

- depending on what you did, you will have either two or three partitions but it should be the last one.

- for the last partition, select the number under type and change it to 12.

- at the bottom right, select save changes and click ok.

- restart your computer and double check that the hidden partition is no longer visible.


thanks to ortegaluis


also, re-install power management.

i don't think you can use okr button as acronis button.


Top Kudoed Authors